Pioneer VSX-416-S/-K, 516-S/-K manual Connecting up Connecting a TV and DVD player

Connecting up

Connecting a TV and DVD player

This page shows you how to connect your DVD player and TV to the receiver.

1Connect a coaxial digital audio output on your DVD player to the DIGITAL COAX 1 (DVD/LD) input on this receiver.

Use a coaxial digital audio cable for the connection.1

2Connect the composite video output and

the stereo analog audio outputs2 on your DVD player to the DVD/LD inputs on this receiver.

Use a standard RCA video cable and a stereo RCA phono cable for the connection.

•If your DVD player has multichannel analog outputs, see Connecting the multichannel analog outputs below for how to connect it.

3Connect the analog audio outputs from your TV to the TV/SAT inputs on this receiver. This will allow you to play the sound from the TV's built-in tuner. Use a stereo RCA phono cable to do this.

•If your TV has a built-in digital decoder, you can also connect an optical digital audio output from your TV to the DIGITAL OPT 1 (CD) input on this receiver. Use an optical cable for the connection.3

4Connect the MONITOR OUT video jack on this receiver to a video input on your TV. Use a standard RCA video cable to connect to the composite video jack.

04

English

3TV

DIGITAL				Deutsch
AUDIO OUT	ANALOG AUDIO OUT
OPTICAL			VIDEO IN
	R	L

							4	Français
				FM UNBAL	AM	ANTENNA
				75 Ω	LOOP
	IN		CD
	IN		DVR /
OPT			VCR
1
(CD)				IN	VIDEO			Italiano
ASSIGNABLE			PLAY			WOOFER
2				IN
DIGITAL IN			TV /
	IN		SAT
				IN
			DVD			MONITOR
ASSIGNABLE	IN		/LD			OUT
			FRONT
DIGITALIN				D V D
COAX				5.1CH		SUB
				INPUT
(DVR/VCR)	IN		CD-R			PREOUT
COAX			/ TAPE
			/ MD
1
(DVD/LD)	OUT		REC
	R	AUDIO	L					Nederlands
This receiver
1						2

COAXIAL	R AUDIO L	VIDEO OUT	Español
DIGITAL OUT	ANALOG OUT

DVD player

Note

1If your DVD player only has an optical digital output, you can connect it to the optical input on this receiver using an optical cable. When you set up the receiver you'll need to tell the receiver which input you connected the player to (see The Input Assign menu on page 36).

2This connection will allow you to make analog recordings from your DVD player.

3In this case, you'll need to tell the receiver which digital input you connected the TV to (see The Input Assign menu on page 36).

11

En