Pioneer VSX-416-S/-K minute guide Using the Quick Setup, Italiano, Français, VSX-516 model only

5 minute guide

Using the Quick Setup

You can use the Quick Setup to get your system up and running with just a few button presses. The receiver automatically makes the necessary settings after you have selected your speaker setup, room size and listening position.

•VSX-516 model only – For a more complete surround setup, see Automatically setting up for surround sound (MCACC) on page 8.

If you want to make more specific settings, refer to The System Setup menu on page 31.

Use the front panel controls for the steps below.

AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-516

MULTI JOG

								ENTER
ADVANCED ST/DIRECT/	DVD/LD	DVD 5.1		TV/SAT	DVR/VCR	AM	TUNING/STATION	SIGNAL	SB ch	ACOUSTIC
STANDARD SURR AUTO SURR								SELECT	PROCESSING	EQ
LISTENING MODE
EON	PTY	MIDNIGHT/	SPEAKER							MASTER
MODE	SEARCH	LOUDNESS IMPEDANCE								VOLUME
STANDBY/ON						USB	MCACC
							SETUP MIC
PHONES	TUNER	TONE	QUICK	SETUP	RETURN
MUTE	EDIT		SETUP
		MULTI JOG
								DOWN		UP

Illustration shows the VSX-516 model

1If the receiver is off, press STANDBY/ON to turn the power on.

2Press QUICK SETUP.

3Confirm your subwoofer setting.

•VSX-416 model – Use the MULTI JOG dial to select YES or NO, depending on whether you’ve connected a subwoofer, then press

ENTER.

•VSX-516 model – SW DET flashes in the display while the receiver checks your setup for a subwoofer. SW YES or SW NO confirms the subwoofer check, then the display prompts you to select your speaker setup.

4Use the MULTI JOG dial to choose your speaker setup.

If you selected YES (VSX-416 model) or subwoofer was detected (VSX-516 model) for the subwoofer setting in step 3, the following choices are available:

2.1ch – 3.1ch – 4.1ch – 5.1ch – 6.1ch*

02

If you selected NO (VSX-416 model) or			English
subwoofer wasn’t detected (VSX-516 model) for
the subwoofer setting in step 3, the following
choices are available:
		2.0ch – 3.0ch – 4.0ch – 5.0ch – 6.0ch*
	• Check the table below to find the speaker		Deutsch
		setup that corresponds with your system.
			Français
			Italiano
		* VSX-516 model only	Nederlands
Depending on the distance of your speakers
5		Press ENTER.
6 Use the MULTI JOG dial to choose your
room size.
from the listening position, choose between
small, medium, or large (S, M or L), M being an			Español
average-sized room.
7		Press ENTER.
8 Use the MULTI JOG dial to choose your
listening position.
You can cycle between the following choices:

• FWD – If you are nearer to the front speakers than the surround speakers

• MID – If you are equal distance from the front and surround speakers

• BACK – If you are nearer to the surround speakers than the front speakers

9 Press ENTER to confirm your setup.

The display shows the speaker setup, room size and listening position that you have selected.

7

En