Sanyo VA-SW80LITE instruction manual Installing the Software, Welcome window appears

INSTALLING THE SOFTWARE

Install the DVR Utility Software to the computer that is connected to the network. The following procedure will install the hardware key driver and the MP2 viewer at the same time.

1

2

3

Insert the DVR Utility Software CD into the CD-ROM drive of the computer.

The “Welcome” window appears.

Click [Next] in the “Welcome” window.

Click [Yes] in the “License Agreement” window.

The License Agreement will be displayed. Be sure to check the terms of the License Agreement carefully.

4

5

Click [Next] in the “Choose Destination Location” window.

Normally you should accept the default location without changing it. If you would like to change the destination folder for installing the software, type the path to the folder directly into the box, or click [Browse] and select the folder to be used for the installation.

Click [Next] in the “Select Program Folder” window.

This lets you check the program folder where the program icon will be added. Normally you should accept the default folder without changing it. If you would like to change the program folder, type the folder name into the box, or select an existing folder from the list underneath.

6 English