Sanyo VA-SW80LITE instruction manual Recording Images, Normal recording from the multi screen

RECORDING IMAGES

●Normal recording from the multi screen

Images from multiple DVRs can be recorded at the same time from the multi screen. The operations for each window are the same as for the quad screen.

1

2

3

4

Click (1) on the toolbar.

The multi screen will be displayed.

Click the title bar (2) of the recording window.

The title bar will change to blue.

Double-click a DVR in the “TARGET” window (3).

Live images from the selected DVR will be displayed in the window. The title bar will change to blue and image mode (LIVE) will be displayed.

Click (4) on the recording control panel.

The REC indicator on the DVR will illuminate and recording of the live images will start.

A b (red) mark will be displayed in the title bar while recording is in progress.

1

5 4

2

3

5 Recording in a maximum of four windows is possible using the same procedure.

6 To stop recording in a window, click the title bar to select the window and then click (5).

The REC indicator on the selected DVR will switch off and recording will stop.

●Recording images that are not displayed

When normal recording is being carried out, it is not necessary to have the live images displayed in any window on the screen. Once the DVR has been specified in the “TARGET” window on the screen, the commands made using the recording control panel will be valid regardless of the display status of the images.

•The “TARGET” window and the recording control panel will be displayed in the main screen, and normal recording will be possible.

•The “BROADCAST” window can be used to transmit recording start and stop commands all at once for all registered DVRs.

50 English