SEARCHING

(User Level: ID2 or higher)

Normal recording images, timer recording images and alarm recording images that have been recorded by a DVR can be searched through using the computer and played back. The following three search modes are available.

Time/date search: (P.55)

This lets you search all images on the DVR’s hard disk(s) randomly by specifying a recording date.

Alarm search: (P.56)

This lets you search for alarm recordings from an alarm list.

Alarm thumbnail search: (P.58)

This lets you search for alarm recording images by means of thumbnails (compressed images).

Time/Date Search

This lets you search for images that have been recorded on the DVR’s hard disk by the date and time that they were recorded.

1 Display the playback window for the DVR to be searched.

The playback window can be either in the quad screen or the multi screen. If using the multi screen, click the title bar to specify the DVR to be searched.

2 Click the top [SEARCH] spin buttons (1) to select the date (day/month/year) to start searching from.

3 Click the bottom [SEARCH] spin buttons (2) to select the time (hour/minutes/ seconds) to start searching from.

4 Click

(3).

The images will be played back from the specified date and time.

You can carry out operations such as still and cue of the playback images using the playback control panel. (P.54)

If no images are found for the specified date and time, the images that are immediately after that date and time are displayed.

The date display order will vary depending on the Windows time display settings. The display order that has been set with Windows will be displayed as text at the top and bottom of the spin buttons.

1

2

3

Example: To specify 18:31:18 on July 7, 2003

English

55

Page 56
Image 56
Sanyo VA-SW80LITE Searching, User Level ID2 or higher, Time/Date Search, Example To specify 183118 on July 7