Sanyo VA-SW80LITE instruction manual Basic timer download operation and specifications

TIMER DOWNLOAD (User Level: ID2/3 or higher)

●Basic timer download operation and specifications

•When the download start time specified in [SCHEDULE] is reached, the downloads will be carried out in order starting from no. 1.

•Timer downloads require images to have been recorded during the image recording time specified.

If there is no data to be downloaded from during the time range specified, an error will occur, that download number will be skipped and the download operation will proceed to the next number. The details of the error can be checked in the “Download Log” mentioned later on.

•The timer download function will not operate if this software is not running.

•If the target DVR is being controlled by another computer, an error will occur when the download starting time is reached.

•If the download starting time is reached while the DVR is currently being controlled by the same computer, a confirmation dialog box with the message “START DOWNLOADING?” will be displayed.

If [OK] is selected: Downloading will start.

If [Cancel] is selected: Monitoring will be interrupted and all downloads that have been reserved will be canceled.

If no response to the confirmation dialog box is received after about 15 seconds, the window will close automatically and the download that has been reserved will start.

•The filename for the saved data will be “(DVR name)_(Starting date)_(Starting time).mp2”.

Example: DVR-1_20030623_1500.mp2

If the DVR name contains “/” or “*” characters, these will be replaced by “+”.

The timer download function cannot be used if you are simultaneously viewing four input screens that are being controlled by the same PC, or if some other PC is connected to the target DVR.

72 English