Sanyo VA-SW80LITE Menu Settings Menu Window, Daylight Saving Default setting no USE, Example

MENU SETTINGS (MENU WINDOW) (User Level: ID4)

2DAYLIGHT SAVING (Default setting: NO USE)

This sets daylight saving time and whether daylight saving is to be used or not.

Available settings:

USE: The software switches automatically to daylight saving time.

NO USE: The software does not switch to daylight saving time.

If “USE” is selected, you will need to specify the dates and times for the software to switch from standard time to daylight saving time and from daylight saving time to standard time.

The following example shows the default settings.

Example:

•After 1:59 on the last Sunday in March, the clock will change to show 3:00 and the time will advance by one hour.

•To put the clock back by one hour so that 1:59 is followed by 1:00 on the last Sunday in October.

a b c d

To change the default setting, use drop-down list boxes and spin buttons to change the [ON (time for switching to daylight saving time)] and [OFF (time for daylight saving time to end)] settings, and then click [APPLY].

3EXT. CLOCK ADJUST TIME

If more than one DVR is connected, the clocks for all DVRs can be adjusted automatically to the same time.

Use the spin buttons to set the time, and then click [APPLY]. When a signal is input to the CLOCK ADJ IN terminal at the rear of the DVR, the time adjustment function will operate.

This only applies for DVRs that are equipped with a CLOCK ADJ IN terminal.

●Refer to page 17 for explanations of the setting buttons (CANCEL/APPLY).

e f g h

a. Sets the week to change to daylight saving time.

b. Sets the weekday for changing to daylight saving time.

c. Sets the month for changing to daylight saving time.

d. Sets the hour for changing to daylight saving time.

e. Sets the week for daylight saving time to end.

f.Sets the weekday for daylight saving time to end.

g.Sets the month for daylight saving time to end.

h.Sets the hour for daylight saving time to end.

English 29