Sanyo VA-SW80LITE Register DVR tab Operation only possible at master computer, Create List

INITIAL SETUP (SETUP WINDOW) (User Level: ID4)

■REGISTER DVR tab (Operation only possible at master computer)

The operations in this tab are limited to the master computer only. They let you register and delete DVRs that are connected to the monitoring network. Slave computers obtain the registration information by communicating with the master computer.

●Names and functions of each window component

2

1

3 4 5 6

7

89 F

1TCP/IP addresses (IP ADDR.)

This shows the addresses for registered DVRs.

2TCP/IP address select buttons (AUTO/MANUAL)

These buttons select the method (automatic or manual) to use for assigning DVR addresses.

3DVR names (DVR NAME)

This shows the registration names for the DVRs.

(When a new DVR is registered, the last digits of the MAC address are used as the default setting.)

4Attribute groups (GROUP)

This shows attribute groups (such as setup location) for registered DVRs.

5Media Access Control Address (MAC ADDR.)

This shows the unique machine addresses for each DVR. These addresses are displayed automatically.

6DVR type (TYPE)

Shows the types of DVRs connected.

• DSR-M804/DSR-M800

7Registration list create button

(CREATE LIST)

In AUTO mode, the list is created using the Automatic setting method (P.21), and in MANUAL mode, it is created using the Manual setting method (P.22).

8DVR name entry box (DVR NAME)

When registering a new DVR, type the name for the DVR in this box using 10 alphanumeric characters or less.

(When a new DVR is registered, the last digits of the MAC address are used as the default setting.)

20 English