PLAYING BACK RECORDED IMAGES

(User Level: ID1 or higher)

When playing back recorded images, click the playback button in live mode. Playback of images from the specified DVR will start.

Playing Back Recorded Images

1 Switches to live image mode.

3 Using the playback control panel

Live images from the DVR to be played back will be displayed in the window.

At the multi screen, click the title bar to specify the DVR to be played back in the

4-screen display. The title bar of the window for the specified DVR will change to blue.

2 Click in the playback control panel.

The display will change to the playback images and the normal recordings and alarm recordings for the specified DVR will be played back in order. The image mode display in the title bar will also change from “LIVE” to “PLAY”.

At the multi screen, you can use the same procedure to display recorded images for up to a maximum of four DVRs. Images from the same DVR cannot be played back in more than one window.

The playback control panel can be used to carry out playback operations such as still and cue. (P.54)

While alarm recordings are being played back, the title bar for the corresponding channel will change to yellow (red characters).

When playing back images in the multi screen, the sound played back will be the sound from the window with the blue title bar.

If the images in one window of the multi screen are being fast forwarded or rewound, you cannot cue or review images in any of the other windows. There is no restriction on slow playback and still operations.

If you click without specifying a DVR, the following pop-up menu will be displayed to prompt you to specify a DVR. Click [OK] and then select the DVR in the “TARGET” window.

English

53

Page 54
Image 54
Sanyo VA-SW80LITE Playing Back Recorded Images, Switches to live image mode, Click in the playback control panel