OPERATION
OPERATION
4.CONNECTING ATTACHING HEADS TO THE BOOM
1 Start by using a hoist to lower the boom(1) down to the Machete head(2). Align the Boom with the Machete Head Hitch Post(3), insert the upper hitch pin(4) through the Dipper end of the boom and the Machete Head Upper Hitch Post. Attach with washer(5), nut(6) , and cotter pin(13).
2.Then align the lower linkage(7) of the Boom and insert the lower hitch pin(8) throught hitch post. Attach with nut(9) and bolt(10).
3.Finally make sure all bolts, nuts, and pins are tightened to recommended torque.
4.1Connecting Mower Head Hydraulics
1.Follow hydraulic connections according to the Hydraulic Connection Decal on boom. Attach the Mower Hydraulics to the Boom and the Motor according to the colors specified on decal. Then attach the door cylinder hoses from the boom to the Maverick Heads Door Cylinder according to the colors specified on decal.
2.When connecting the mower head hydraulic lines to the boom, keep the hose, quick couplers, and swivels free of dirt and other contaminants. Wipe all dirt and other contaminants from the hydraulic remote ports and mower hydraulic hose coupler with a clean cloth before connecting. OPS- B- 0019_A
Avoid contact with hot surfaces including hydraulic oil tanks, pumps, motors, valves and hose connections. Relieve hydraulic pressure before performing maintenance or repairs. Use gloves and eye protection when servicing hot components. Contact with a hot surface or fluid can cause serious injury from burns or scalding.
MAVERICK 3/09 | Operation Section |
© 2009 Alamo Group Inc.
