Alamo FC-0001 manual Operation

(SG-29)

OPERATION

•Select F-1 to power the motor. This is best done when the engine RPM is at idle. Doing this at a high RPM will cause the system pressure to surge sending fluid over relief and causing excess heat to be introduced into the system.

•At any time the cutter-head motor E-stop can be pushed to disable the motor circuit. If this is done the switch must be raised in the RUN position before the motor circuit can be reactivated.

•At this time the motor circuit is powered and the mower head is active.

•This screen also shows the tank temperature in degrees Fahrenheit.

•To turn off the motor, Key F-1.

•Joystick is now disabled

The Joystick Master Control Switch must be OFF to prevent accidental movement of the boom and cutting head whenever the mower is not being operated.

.

Operate the Tractor and/or Implement controls only while properly seated in the Tractor seat with the seat belt securely fastened around you. Inadvertent movement of the Tractor or Implement may cause serious injury or death.

MAVERICK 3/09 Operation Section 3-29

© 2009 Alamo Group Inc.

OPERATION