OPERATION
The XP2, is a controller module that is mounted at the front of the tractor next to the Maverick control valve. The function of this component is to provide a gateway for incoming and outgoing information. Information is sent via the network to this module in order to provide control of the solenoids for valve operation. REFERENCE PRODUCT MANUAL FOR XP2 CAN MODULE. AVAILABLE ON THE INTERNET AT www.iqan.com VIEWABLE WITH ABOBE ACROBAT READER, AVAILABLE AT www.adobe.com.
The XT2, is also a controller module that is mounted at the front of the tractor on the side of the tank. The function of this component is to provide a gateway for incoming and outgoing information. This module rec eives input from the instrumentation, then provides that information to the network for further utilization. REFERENCE PRODUCT MANUAL FOR XT2 CAN MODULE. AVAILABLE ON THE INTERNET AT www.iqan.com
VIEWABLE WITH ABOBE ACROBAT READER, AVAILABLE AT www.adobe.com.
The XS is an expansion module that provides extra input and output capabilities in order to gain more flexibility on the network. The XS is responsible for receiving the signals from the joystick and other in- cab inputs and making them available on the network. REFERENCE PRODUCT MANUAL FOR XS EXPANSION MODULE. AVAILABLE ON THE INTERNET AT www.iqan.com VIEWABLE WITH ABOBE ACROBAT READER, AVAILABLE AT www.adobe.com.
The rotating parts of this machine continue to rotate even after the Tractor has been turned off. The operator should remain in his seat for 60 seconds after the brake has been set, the PTO disengaged, the tractor turned off, and all evidence of rotation has ceased.
“Wait a minute...Save a life!”
MAVERICK 3/09 | Operation Section |
© 2009 Alamo Group Inc.
