Password

The factory default password for Admin and user privileges is "4321." In case of user privilege, you can select any of 5 users (User1 to User5) and assign user access rights for the selected user. If you press Setup in User Authority, all the access rights are selected.

●The Default Password is 4321.●New Password

This is used to change the system password inside SHR-2160/2162/2080/2082. You are allowed to create a password up to 8 digits. Press the “Enter” key and a channel button from 1~9,10(operates as 0) at the left. Press the “Enter” key after change to move to “New Password Confirm”.

●Confirm

It confirms that the newly input password is correct. Enter the new password again in the field.

●Password Lock

If it is set to On, a pop-up window for user validation (You have to fill in the Setup, ID, and Password fields.) appears every time you select a menu. If it is set to Off, you can enter menus without entering the password.

●Record Lock

If the Record Lock is set to On, a pop-up window, asking for the password appears while disabling the recording.

●User Authority

You can select any of Search, Backup, PTZ, and Shutdown. As an example, if the user has no access right for Search, the user cannot enter the Search menu.

●All Key Lock On

If you select this, the system will enter the live mode immediately. If you press any button on the front panel or remote control, the password input window appears. If the correct password is input, the lock function is deactivated.

Note

[All Key Lock On]

If you select this, the system immediately switches to the live mode and all buttons are locked.

English 5-4