5.When mounting an additional HDD, the primary master has to be mounted.

Mount the HDD you want to add after setting the master/slave jumpers in the proper order.

When adding one – Primary slave (add one additionally on the top of the bracket that has a built-in HDD when coming out of the factory.)

When adding two – Secondary master (mount under the bracket that is empty when coming out of the factory.)

When adding three – Secondary Slave (mount on the top of the bracket that is empty when coming out of the factory.)

Mount the HDD to the bracket-HDD with (A)SCREW-SPECIAL (BWH,6-32UNC,L10.5) (4 spots) that was provided as an accessory.

6.Re-mount the bracket-HDD mounted with the HDD’s to the place where it was separated from. Place the bracket-HDD so that all five mounting spots on the bottom and the bracket-HDD’s mounting holes are perfectly aligned, then slide it toward the outside of the product and tighten the screws.

English 2-8