SHR-2160/2162/2080/2082 USER’S MANUAL

Note

If you want to connect IP Router with the main body of SHR-2160/2162/2080/2082, you shall designate a port for SHR-2160/2162/2080/2082 in the IP Router setup menu.

The main body of SHR-2160/2162/2080/2082 uses 4 ports for TCP communication.

In addition, if you want to use the DHCP function backed by IP Router to allocate Dynamic IP to the main body of SHR-2160/2162/2080/2082, you shall designate a port for the IP which SHR-2160/2162/2080/2082 has been allocated by the IP Router setup menu.

If you use IP Router, you are recommended to rather determine IP and Port numbers to be allocated to the main body of SHR-2160/2162/2080/2082 from the IP Router setup menu, set the connection mode to Static IP for the main body of SHR-2160/2162/2080/2082, and input the determined IP and Port number in IP Router than use the DHCP function.

Please refer to the IP Router User’s Manual or call the manufacturer to set up IP Router.

Callback Settings

●The Callback function is used to forward a callback message to the IP where SmartViewer is in action in case Alarm, Motion Detection, or Video Loss event occurs.

●On/Off : Off is default but you may choose On.

●IP Address : IP setting is available only when On is selected from On/off Setting. Select the IP address of PC where SmartViewer is in action.

●Port(UDP) : You may choose one from 7900 to 7999 and the number changes by 1. Selects the Port value for the Callback Connection menu from SmartViewer Setup.

●Retrial : You may choose one from 1 to 20 and the number changes by 1.

Caution

-Though Callback is set to ON, any Callback message will be created unless Alarm, Motion Detection, and Video Loss are set by EventRecord.

-Unless the Callback button is clicked, SmartViewer does not receive any Callback message.

5-31English