●Sequence Time
-When connecting with SHR-2160/2162/2080/2082 in the monitoring mode, set the auto sequence time if the auto sequence is set. The time can be set from 10 to 20 minutes.
●OSD Display
-Sets if OSD shall be displayed on each channel of Smart Viewer.
-Whether you check “Enable” or not, OSD will appear or not.
However, Audio icon, PTZ icon, REC icon, and Alarm/Motion event icon will not be affected by the OSD condition.
●Callback Connection
-Sets the port for Callback connection.
●Auto Connection
-Sets if the smart viewer is automatically connected to SHR-2160/2162/2080/2082 or site at the initial operation.
-If you check “Auto Connection Enable”, the names of SHR-2160/2162/2080/2082 and Site currently registered at the DVR/Site list will be displayed in the following list. If you select one from the list, the smart viewer will connect to the selected SHR-2160/2162/2080/2082 or Site when it operates later.
●Language
- Sets the language used in the SmartViewer.
English 9-26
