Pressing both the mode button and zoom button on the front left side the same time for five seconds switches the VGA status to Composite status and Composite status to VGA status then reboots.
①Composite : Makes the output come out through the “Composite /
➁VGA : Makes the output come out through the “VGA Out” port.
When changing the output from Composite to VGA or from VGA to
Composite, the system reboots automatically.
●Play channel locationDesignates the one channel location to play in play 9 split mode.
Lower
Center : Sets the location in the center.
●You can set changes for a split screen.
You can set it to 3, 5, 10, 20, or 30 seconds.
Caution
[Video Out]
When setting the Composite Output, VGA output does not come out. When setting the VGA Output, Composite Output does not come out.
If you press the MODE button and the ZOOM butteon for 5 seconds in the front, the system will change from VGA to COMPOSITE or from COMPOSITE to VGA and reboot.
NTSC VGA output : 720x480 (60Hz)
PAL VGA output : 720x576 (50Hz)
[NTSC]
For NTSC, because VGA output is output at 720x480(60Hz), if you have a PC with a CRT monitor you will have to adjust the image size; and a PC with an LCD monitor that doesn't support 720x480 adjusts the image signal to 640x480. During this process, vertical line noise can occur.
[PAL]
For PAL, because VGA output is output at 720x576 (50Hz), if you have a PC with a CRT monitor, you will have to adjust the image size; and in the case of a PC with an LCD monitor that doesn't support 720x576, there won't be any images on the upper and lower parts of the screen. Especially in the case of LCD monitors that don't support 50Hz, because the images won't come up, we ask that you pay careful attention when selecting an LCD monitor.