Telenetics DSP9612RM manual Mechanical Specifications

Page 32

Specifications
Receiver
dynamic range:	0 to –30 dBm or –10 to –43 dBm
Operating
temperature:	-40°C to +85°C
Surge protection:	Leased line, up to 15KV
Carrier Control:	Constant or switched, DIP switch selectable
Carrier loss
recovery:	Train on Data
Throughput delay: Less than 10 milliseconds for fast polling.
Auto RTS:	Support DTE without hardware RTS
	(high speed only)
Anti-Streaming:	27-second timer to prevent transmitter lock-up
	network

Mechanical Specifications

Dimensions:	9 inches deep x 6.25 inches high x .87 inches
	thick
Weight:	8 ounces (card only)

Page 32

Image 32

Contents DSP9612RM Flash Poll Rack-Mount Modem User’s Guide Compliances Contents Contents Chapter Introduction Features Applications Ancillary DocumentationIntroduction Additional Items You Need Chapter InstallationUnpacking Your Hardware Hardware Overview Front View of ModemComponent View Installation Summary Configuring the ModemConfiguring the Modem SW1-1 through SW1-4 − Transmit Level high- & low-speed modes SW1-5 − Receiver Dynamic Range high- & low-speed modes SW2-1 − Fast Poll/FSK high- & low-speed modes SW2-8 − Carrier Control high- & low-speed modes Low-Speed FSK Mode SW1-1 through SW1-4 Switch Settings SW1-6 and SW1-7 − RTS-CTS Delay low-speed mode only SW2-2 − CD Delay low-speed mode only SW2-5 − Soft Carrier low-speed mode only Installing the Modem in the Universal Data Shelf Installing the Modem in the Universal Data ShelfInstalling the Modem Connecting to a Transmission Line Modular Jack ConnectorsConnecting an RS-232 Device LEDs DLBLoopback Control Switch Illustrates these three diagnosticsAppendix a Troubleshooting Problem SolvingPage Appendix B Specifications General SpecificationsMechanical Specifications Back-to-Back Connections to a Second Modem RS-232 RTU InterfaceEnvironmental Specifications CompliancesAppendix C Limited Product Warranty Appendix D RMA Procedure Return Merchandise Authorization RMA Procedure