Star Manufacturing LC-4522 user manual Connecting to a power outlet and turning power on and off

Page 14

Connecting to a power outlet and turning power on and off 11

Connecting to a power outlet and turning power on and off

o Plug the power cord of the printer into a standard power outlet whose voltage matches the power rating noted on the label affixed to the bottom of your printer.

Caution!

If the voltage marked on the bottom of your printer does not match the voltage from the outlet you are using, do not plug in the power cord. Contact your dealer for assistance.

o Set the switch on the left of the printer to 1 (ON) to turn power on, and to 0 (OFF) to turn power off.

Caution!

Whenever you turn off the power, wait for at least five seconds before turning it back on. Otherwise you may damage the printer. We also recommend that you unplug the printer from the power outlet whenever you do not plan to use it for long periods. Because of this, you should locate the printer so that the power outlet it is plugged into is nearby and easy to access.

Image 14

Contents LC-4522 Contents Using the EDS Mode Printer Setup Choosing a place for the printerPrinter Setup Unpacking the printerGeneral guide General guideOpening the front cover Removing the protective materialsRemoving the protective m aterials Installing the platen knob Installing the ribbon cassetteInstalling the ribbon cassette Removing the ribbon cassette Installing the paper guide Installing the paper guideStanding up the paper guide Connecting to a power outlet and turning power on and off Connecting to a power outlet and turning power on and offLoading fanfold paper Loading fanfold paper Printer Setup Loading fanfold paper Printing on fanfold paper Parking fanfold paper Parking fanfold paperUnparking fanfold paper Using the tear-off function Connecting to your computerPage Switching between on-line and off-line Control Panel OperationsSelecting a font Entering the Print Quality Lock ModeSelecting a Print Quality Entering the Multi-part Mode Form feed fanfold paper Line feedPaper eject cut-sheet paper Micro feedTear-off function fanfold paper Setting the top of form positionSelecting the Quiet Print Mode Changing the auto load position Changing the auto load positionSaving a macro Clearing the printer’s bufferInitializing the printer Initializing the printerUsing the EDS Mode About EDS Mode settingsEntering the EDS Mode Selecting a bank Changing a switch settingSelecting a switch Selecting a bankPrinting the current switch settings Exiting the EDS ModeEDS Mode Settings EDS Mode SettingsSwitches 1,2 Print mode Switch 6 Quiet modeSwitch 7 Not Used Switches 3, 4, 5 Print PitchSwitch 4 Skip over perforation Tractor mode only Switches 1,2 Multi-Part ModeSwitch 3 Auto Tear off Long Switch 5 FF command selection Friction mode onlySwitch 3 Zero Style Switch 1 Character TableSwitch 2 Character Set Switches 4,5 Reserved Switch 6 Print WidthSwitches 6,7 Not Used Switches 1,2,3,4 Page Length Friction ModeSwitch 5 Top Margin Switches 1,2,3,4 Page Length Tractor ModeSwitch 3 CR Centering Position Switch 1 CR Centering at topSwitch 2 CR Centering at seem line Tractor mode only Switch 4 Paper Out DetectorSwitches 1, 2, 3, 4 International Character Set Switch 5 BuzzerSwitch 6 Print direction command Switch 5 Strobe timingSwitches 1, 2, 3, 4, 5 Code Switch 6 Saving Control Panel Status Setting up for printing with MS-DOS Setting up for printing with MS-DOSCut-Sheet Paper Manual Feed Selecting paper typesPaper Handling Cut-Sheet Paper with Optional Automatic Sheet FeederFanfold Paper LabelsAdjusting for paper thickness Adjusting for paper thicknessAutomatic fanfold feeding Manual sheet feedingClearing paper jams Clearing paper jams