Star Manufacturing LC-4522 user manual Switches 1,2 Multi-Part Mode, Switch 3 Auto Tear off Long

Page 36

Switch 7: Not Used

EDS Mode Settings 33

BANK C

Switches 1,2: Multi-Part Mode

Specifies whether the printer’s Multi -Part Mode is enabled (ON, OFF) or disabled (OFF,ON). When the Multi-Part Mode is enabled, the impact of the print head

is increased, but head life is decreased. Enable the Multi -Part Mode when printing on four to five-ply paper. Disable the Multi -Part Mode when printing on 1 to 3 -ply paper.

Both switches turns on, Multi-Part Mode is selected by the adjust-lever position when the position is set to more than 4.

Switch 3: Auto Tear off (Long)

Specifies whether the printer’s auto tear-off (long) feature (page 24) is enabled (OFF) or disabled (ON). Note that this setting controls the application software’s tear-off function only. It does not affect the manual tear-off function that is performed using the control panel buttons.

The manual tear-off function is always enabled.

Switch 4: Skip over perforation (Tractor mode only)

Specifies whether the printer’s skip over perforation feature is enabled (OFF) or disabled (ON). When skip over perforation is enable, printer makes 1 -inch bottom margin automatically.

Switch 5: FF command selection (Friction mode only)

Turn off this switch, FF command performs as paper eject command.

Switch 6: Paper eject at Power ON (Friction mode only)

Turn off t his switch, Printer performs a paper eject operation at power on.

Switch 7: Line Spacing

Selects 1/6-inch (ON) or 1/8 -inch (OFF) spacing between lines.

Image 36

Contents LC-4522 Contents Using the EDS Mode Printer Setup Choosing a place for the printerPrinter Setup Unpacking the printerGeneral guide General guideOpening the front cover Removing the protective materialsRemoving the protective m aterials Installing the platen knob Installing the ribbon cassetteInstalling the ribbon cassette Removing the ribbon cassette Installing the paper guide Installing the paper guideStanding up the paper guide Connecting to a power outlet and turning power on and off Connecting to a power outlet and turning power on and offLoading fanfold paper Loading fanfold paper Printer Setup Loading fanfold paper Printing on fanfold paper Parking fanfold paper Unparking fanfold paperParking fanfold paper Using the tear-off function Connecting to your computerPage Switching between on-line and off-line Control Panel OperationsEntering the Print Quality Lock Mode Selecting a Print QualitySelecting a font Entering the Multi-part Mode Line feed Paper eject cut-sheet paperForm feed fanfold paper Micro feedSetting the top of form position Selecting the Quiet Print ModeTear-off function fanfold paper Changing the auto load position Changing the auto load positionSaving a macro Clearing the printer’s bufferInitializing the printer Initializing the printerAbout EDS Mode settings Entering the EDS ModeUsing the EDS Mode Changing a switch setting Selecting a switchSelecting a bank Selecting a bankPrinting the current switch settings Exiting the EDS ModeEDS Mode Settings EDS Mode SettingsSwitch 6 Quiet mode Switch 7 Not UsedSwitches 1,2 Print mode Switches 3, 4, 5 Print PitchSwitches 1,2 Multi-Part Mode Switch 3 Auto Tear off LongSwitch 4 Skip over perforation Tractor mode only Switch 5 FF command selection Friction mode onlySwitch 1 Character Table Switch 2 Character SetSwitch 3 Zero Style Switches 4,5 Reserved Switch 6 Print WidthSwitches 1,2,3,4 Page Length Friction Mode Switch 5 Top MarginSwitches 6,7 Not Used Switches 1,2,3,4 Page Length Tractor ModeSwitch 1 CR Centering at top Switch 2 CR Centering at seem line Tractor mode onlySwitch 3 CR Centering Position Switch 4 Paper Out DetectorSwitch 5 Buzzer Switch 6 Print direction commandSwitches 1, 2, 3, 4 International Character Set Switch 5 Strobe timingSwitches 1, 2, 3, 4, 5 Code Switch 6 Saving Control Panel Status Setting up for printing with MS-DOS Setting up for printing with MS-DOSSelecting paper types Paper HandlingCut-Sheet Paper Manual Feed Cut-Sheet Paper with Optional Automatic Sheet FeederFanfold Paper LabelsAdjusting for paper thickness Adjusting for paper thicknessAutomatic fanfold feeding Manual sheet feedingClearing paper jams Clearing paper jams