Star Manufacturing LC-4522 Switch 5 Buzzer, Switch 6 Print direction command, Switch 6 ACK timing

Using the EDS Mode 37

Switch 5: Buzzer

Specifies whether the beep command of buzzer is enabled (ON) or disabled .

Switch 6: Print direction command

Specifies whether the print direction command <ESC>”U”n is enabled (OFF) or disabled.

Switch 7: Not Used

BANK D

Switches 1, 2, 3, 4: International Character Set

Select the international character set you want to use. This setting determines the assignment of 16 character codes.

ON, ON, ON, ON	:USA	OFF,ON, ON, ON	:Japan
ON, ON, ON, OFF	:France	OFF,ON, ON, OFF	:Norway
ON, ON, OFF,ON	:Germany	OFF,ON, OFF,ON	:Denmark-2
ON, ON, OFF,OFF	:England	OFF,ON, OFF,OFF	:Spain-2
ON, OFF,ON, ON	:Denmark-1	OFF,OFF,ON, ON	:Latin America
ON, OFF,ON, OFF	:Sweden	OFF,OFF,ON, OFF	:Korea
ON, OFF,OFF,ON	:Italy	OFF,OFF,OFF,ON	:Ireland
ON, OFF,OFF,OFF	:Spain-1	OFF,OFF,OFF,OFF	:Legal

Switch 5: Strobe timing

Specifies whether the strobe timing of parallel interface is Normal (ON) or Special timing. When printer is connected with Special terminal, it’s necessary to change the timing to Special.

Switch 6: ACK timing

Specifies whether the strobe timing of parallel interface is Normal (ON) or Special timing. When printer is connected with Special terminal, it’s necessary to change the timing to Special.

Switch 7: Not Used