SOYO SY-5S manual Power Off, Suspend Mode

Quick Installation Guide SY-5STM

3. The BIOS Setup screen appears:

ROM PCI/ISA BIOS

CMOS SETUP UTILITY

AWARD SOFTWARE, INC.

STANDARD CMOS SETUP		INTEGRATED PERIPHERALS
BIOS FEATURES SETUP		SUPERVISOR PASSWORD
CHIPSET FEATURES SETUP		USER PASSWORD
POWER MANAGEMENT SETUP		IDE HDD AUTO DETECTION
PNP/PCI CONFIGURATION		SAVE & EXIT SETUP
LOAD SETUP DEFAULTS		EXIT WITHOUT SAVING
LOAD BIOS DEFAULTS
Esc	: Quit	− ↓ → ← : Select Item
F10	: Save & Exit Setup	(Shift) F2 : Change Color

Time, Date, Hard Disk Type…

You are now ready to configure your system with the BIOS setup program. Go to Chapter 3: BIOS SETUP

Or continue to Chapter1: INTRODUCTION and Chapter2: HARDWARE SETUP for more information about your SY-5STM

Mainboard.

Step 15. Power Off

There are three possible ways to turn off the system:

1.Use the Shutdown command in the Start Menu of Windows 95/98 to turn off your computer.

2.Use the power off by hot-key function.

Press the Ctrl + Alt + ß(BackSpace) 3-simultaneous key combination to turn off your system.

(To activate the power off by hot-key function, in BIOS [Power Management Setup] menu, set the [Hot Key Power Off] field to [Enabled].)

3.Press the mechanical power-button and hold down for over 4 seconds, to shutdown the computer. If you press the power- button for less than 4 seconds, then your system will enter into

Suspend Mode.

26