SOYO SY-5S manual Multi I/O Addresses, Making Connections

Hardware SetupSY-5STM

2-9 MULTI I/O ADDRESSES

Default settings for multi-I/O addresses are as follows:

Port	I/O Address	IRQ	Status
LPT1	378H	7	ECP + EPP
COM1	3F8H	4
COM2	2F8H	3

Warning: If a default I/O address conflicts with other I/O cards such as sound card, you must change one of the I/O addresses to remedy to this address conflict. (I/O addresses can be adjusted from the BIOS Setup Utility)

2-10 MAKING CONNECTIONS

For making case connections, attach the mainboard to case devices by plugging flat cables and device cables to the connectors on the mainboard.

Connect the mainboard to external peripheral devices such as PS/2 keyboard, parallel printer, PS/2 mouse … via the back panel connectors.

(Refer to the "Quick Installation Guide" for directions on how to make connections to the mainboard.)

37