SOYO SY-5S manual ROM PCI/ISA Bios Integrated Peripherals Award SOFTWARE, INC

BIOS Setup Utility SY-5STM

3-8 INTEGRATED PERIPHERALS

Caution: Change these settings only if you are already familiar with the Chipset.

The [INTEGRATED PERIPHERALS] option changes the values of the chipset registers. These registers control the system options in the computer.

The following screen shows default settings.

ROM PCI/ISA BIOS

INTEGRATED PERIPHERALS

AWARD SOFTWARE, INC.

Internal PCI/IDE		: Both
IDE Primary Master PIO		: Auto
IDE Primary Slave PIO		: Auto
IDE Secondary Master PIO		: Auto
IDE Secondary Slave PIO		: Auto
Primary Master	UltraDMA	: Auto
Primary Slave	UltraDMA	: Auto
Secondary Master	UltraDMA	: Auto
Secondary Slave	UltraDMA	: Auto
IDE Burst Mode		: Enabled
IDE Data Port Post Write		: Enabled
IDE HDD Block Mode		: Enabled
Onboard FDC Controller		: Enabled
Onboard UART 1		: 3F8/IRQ4
Onboard UART 2		: 2F8/IRQ3
Onboard UART 2 Mode		: Standard
IR Duplex Mode		: Half
Use IR Pins		: IR-RX2TX2

Onboard Parallel Port	: 378
Parallel Port Mode	: Normal
ECP Mode Use DMA	: 3
Parallel Port EPP Type	: EPP1.9
USB Controller	: Disabled
Power Button Over Ride	: Enabled
Ring Power Up Control	: Enabled
Power Up by Alarm	: Disabled

ESC	: Quit	− ↓ → ←	: Select Item
F1	: Help	PU/PD/+/-	: Modify
F5	: Old Values	(Shift) F2	: Color
F6	: Load BIOS Defaults
F7	: Load Setup Defaults

The following tables describe each field in the INTEGRATED PERIPHERALS Menu and provide instructions on how to configure the IDE controls, FDC controls, and the onboard serial and parallel ports.

61