SOYO SY-5S manual AutoCAD R11 Setup, SETDSPADI=\ADI42\RCPSIS.EXP Enter

SiS VGA Driver Installation SY-5STM

3.In “Unpack & Copy ADI 4.2 Drivers” screen, key in the

“drive:\directory” where these drivers will reside (default

C:\ADI43). The program will unpack and copy all related driver files to the designation you assign.

4.After unpack and copy and complete, exit the INSTDRV.EXE program.

5.Refer to Sec.1.2.2 to SEC. 1.2.5 for the installation procedures of each program.

6-3.2 AutoCAD R11 Setup

1.The following procedures assume that

ØYou have completed the “unpack & copy” procedure.

ØYour ADI 4.2 drivers are located in C:\ADI42.

2.Add the following setting to your own batch file for AutoCAD R11 (i.e. ACADR11.BAT) or to your AUTOEXEC.BAT file:

SETDSPADI=\ADI42\RCPSIS.EXP <Enter>

3.Delete the configuration file ACAD.CFG that resides in the \ACAD directory.

4.Type ACADR11 <Enter> to configure your AutoCAD R11 system.

5.In “Select Display Device:” item, choose “ADI P386 V4.0/4.1 display” .

6.In “Select Display Resolution” screen, choose which display driver you want to use.

7.Perform the listed instructions on the screen and the system will start with the selected display setting.

86