SOYO SY-5S manual AutoCAD R12 Setup, Copy C\ADI42\RCPSIS.EXP C\ACADR12\DRV, DEL C\ACADR12\ACAD.CFG

SiS VGA Driver Installation SY-5STM

6-3.3 AutoCAD R12 Setup

1.The following procedures assume that

ØYou have completed the unpacking & copy procedure.

ØYour SiS ADI 4.2 drivers are located in C:\ADI42.

ØYour AutoCAD R12 program is located in C:\ACADR12.

ØYour AutoCAD R12 default drivers are located in C:\ACADR12\DRV.

ØYour AutoCAD R12 configure file ACAD.CFG is located in C:\ACADR12.

2.Copy the RCPSIS.EXP driver file to C:\ACADR12\DRV. You may complete this step with the following command:

COPY C:\ADI42\RCPSIS.EXP C:\ACADR12\DRV

3.Delete your original ACAD.CFG file. You may complete this step with the following command:

DEL C:\ACADR12\ACAD.CFG

4.Restart your AutoCAD R12 program as usual.

5.AutoCAD R12 will ask you to complete the configuration procedures since it cannot find the configuration file ACAD.CFG.

6.Follow the instructions of AutoCAD R12 to proceed with configuration.

7.In “Available Video Displays:” item, choose the “SiS Super VGA ADI v4.2 Display and Rendering driver” item.

8.In “Select Display Resolution” screen, choose which display driver you want to use.

9.Perform the listed instructions and the system will start with the selected display setting.

87