SOYO SY-5S manual DOS Utility DOSINST.EXE, Avance software copy to C\A3SOUND System bootup drive

Page 81

ALS120 Audio Driver Installation

SY-5STM

5-2 DOS Utility (DOSINST.EXE)

You can also install the ALS120 audio driver by running the DOSINST.EXE application program in DOS environment:

1.Insert the CD Title Disk into diskette drive D (CD-ROM).

2.If Windows 3.1/95 is running, exit the application.

3.At the C:\> prompt, type d: (CD-ROM) and press the <Enter> key.

4.At the D:\SOYO_CD\rev_10\utility\sis_aud\> prompt, type

DOSINST.EXE and press the <Enter> key.

5.The Avance Sound Chip Installation Program screen will be displayed showing the following defaults:

Avance software copy to: C:\A3SOUND

System bootup drive:

C:\

To make changes to the defaults, select the parameter with the Up/Down Arrow keys and press the <Enter> key. Then change the parameter and press the <Enter> key again to accept the changes.

When satisfied with the new parameters or to accept the defaults, select “accept the above” with the Up/Down Arrow keys and press the <Enter> key.

6.The installation of the Avance Logic software drivers will now begin.

7.When all of the files are copied to the fixed disk, installation program will automatically update the AUTOEXEC.BAT, saving copies of the original files with the extension “.ALS” , and the A3CONFIG.EXE utility will automatically start. Use the instructions given in “Setup Utility Program" in a next section to set up the ALS120 sound card.

77

Image 81
Contents SY-5STM Edition June SY-5STMVersion 5STM SerialTable of Contents SY-5STM Back Panel SY-5STM Mainboard LayoutMainboard Features Pwrbt BACK-PANEL FeaturesKEY Features What kind of speaker can connect to Line-out port? PreparationsInstallation Guide CPU InstallationUnpacking the Mainboard CPU Fan Installation Default CPU voltage settings are as follows CPU Voltage Setting JP17, JP30Voltage Setting Type JP17 JP30 Voltage Settings for Various Processors Type VcoreVoltage Settings for Various Processors Type Vcore Voltage CPU Frequency Setting JP10~16 Intel P54C P90 60MHz AMD K5 PR90 60MHz 75MHz Quick Installation Guide Dram Module Installation IDE Device Installation HDD, CD-ROM Floppy Drive InstallationFront Panel Connections Reset Power LED & KeyLockSpeaker Turbo LEDBack Panel Connections ATX Power On/Off SwitchParallel Port PRT Onboard Serial Port COM1PS/2 Keyboard PS/2 MouseOther Connections Serial Port COM Infrared IR Wake-On-LAN WOLOther Display Cards CPU Cooling Fan InstallationATX Power Supply ATX PowerPower On Suspend Mode Power OffCPU KEY FeaturesL2 Cache Controller Dram ControllerPeripheral Controller BUS ControllerThis Quick Start Guide Handling the MainboardElectrostatic Discharge Precautions Hardware Setup CPU Voltage Setting JP30 CPU Voltage Setting JP17, JP30Host Bus Frequency CPU Frequency Setting JP10~16Mode Intel P54C/P55C CPU Burst Mode Jumper JP22Linear Burst field to Enabled CPU BurstSound Settings J4, J5, J2 WAKE-ON-LAN Connector JP44Cmos Clear Jumper JP5 Cache Configuration Memory ConfigurationTAG RAM Making Connections Multi I/O AddressesModifying selected items Selecting itemsExit Without Saving Save and Exit SetupStandard Cmos Setup Date & Time Display Setting Please NoteTime Primary Setting Description Secondary Master & Slave Type Hard Disks Type & ModeFloppy Drives Setting Description Drives a & B ModeHalt On VideoROM PCI/ISA Bios Bios Features Setup Award SOFTWARE, INC Bios Features SetupCache Memory Options Setting Description CPU Internal Cache Virus Warning Setting DescriptionExternal Cache CPU L2 Cache ECCSwap Floppy Drive Boot Up NumLock Status Typematic Settings Typematic Rate Setting Description System Boot Control Settings Description Gate A20 OptionTypematic Delay Memory ParitySecurity Option Setting Description OS Select for DRAM64MB Video or Adapter Bios ShadowSecurity Option ROM PCI/ISA Bios Chipset Features Setup Chipset Features SetupChipset Features Setup RAS Pulse Width Refresh RAS Precharge Time RAS to CAS DelayRefresh Cycle Time Features Chipset Features SetupChipset Sdram WRVideo Bios Cacheable Memory Hole At 15M-16M ISA Bus Clock Frequency System Bios CacheableLinear Mode VGA SharedROM PCI/ISA Bios Power Management Setup Award SOFTWARE, INC Power Management SetupSwitch Power Management Controls Setting DescriptionManagement PM ControlStdby Speed Hot Key Power OffDiv by Modem UsePM Timers HDD Off After Setting Description Doze ModeStandby Mode LPT Ports Activity PM Events COM Ports Activity Setting DescriptionHDD Ports Activity VGA Activity IRQ 3-7,9-15This option sets the mainboards PCI Slots PNP/PCI Configuration SetupSetting Description Controls Resources Controlled By 1 PNP/PCI Configuration ControlsReset Configuration Data PNP/PCIDMA-# PCI IRQPCI IDE Load Bios Defaults Load Setup DefaultsIntegrated Peripherals ROM PCI/ISA Bios Integrated Peripherals Award SOFTWARE, INCIDE Burst Mode IDE Data Port Post Write IDE HDD Block ModeIDE IR Duplex Mode Use IR Pins Parallel Port Mode Onboard Parallel Ports Setting DescriptionECP Mode Use DMA Parallel Port EPPRing Power Up Control Power Up by Alarm Supervisor Password User Password Enter PasswordIDE HDD Auto Detection ROM PCI/ISA Bios Cmos Setup Utility Award SOFTWARE, INCOnboard VGA FeaturesVideo Functions Connecting to the VGA PortOnboard Audio Onboard Joystick PortConnecting your Audio Devices Software SupportCompatibility Connecting Speakers Using the Avance Audio DriverSelect Programs, Accessories, and Multimedia path SY-5STM ALS120 Audio Driver Installation Windows \SOYOCD\rev10\utility\sisaud\setup on the command lineDOS Utility DOSINST.EXE Avance software copy to C\A3SOUND System bootup driveWindows Setup Utility Program A3CONFIG.EXEWindows NT 3.5/4.0 SY-5STM Troubleshooting Troubleshooting in DOSTroubleshooting in Windows Introduction SiS VGA Driver InstallationDOS Utility How to InstallSVGAUTL.EXE General DescriptionWhat the Parameters Represent Autodesk ADI 4.2 Protected Mode General Description Driver FilesUnpack & Copy SETDSPADI=\ADI42\RCPSIS.EXP Enter AutoCAD R11 SetupAutoCAD R12 Setup Copy C\ADI42\RCPSIS.EXP C\ACADR12\DRVDEL C\ACADR12\ACAD.CFG 5 3D Studio Version 3.0 Setup AutoShade R2.0 SetupSET DSPADI=\ADI42\RCPSIS.EXP SET RDPADI=\ADI42\RCPSIS.EXPSY-5STM ET24 Chinese Sistag SISV.SYS SISV256.DLL SISV.DLL OEMSETUP.INF InstallationWindows NT 3.5 Selecting Resolution and Color Depth SISV.SYS SISV256.DLL SISV.DLL SISV5597.INF Windows NTSY-5STM Other Files Related to driver installation SETUP.EXE SIS597.DRV SIS597.INF SISMINI.VXDUtilities Selecting Resolution, Color Depth and Refresh RateSETUP.EXE Other Files Related to driver installation InstallationGraphics Setup Zoom Key Setup Power Saving Setup in WindowsVideo Operations DCI Function IBM OS/2 Warp 3.0 Double Byte Character SETUP.CMDSVGA.EXE Others1st phase 2nd phase101 IBM OS/2 Warp 3.0 Single Byte Character SISINST.CMD102 103 Video Modes Standard VGA Modes104 105 Mode Display Colors Frame Sync Video Size Shades Rate Freq106 Enhanced Video ModesColors Frame Sync Video Size Shades Rate Freq 107108 109 110