Silvercrest KH 2450 Handling recorded dictations, Overwriting passages in a recorded dictation

7.6 Handling recorded dictations

7.6.1 Overwriting passages in a recorded dictation

You can amend saved dictations at any point; for this, simply start a new dictation recording at the desired point:

1Switch the voice recorder on by pressing the button »ON/OFF« A. As soon as the start screen is shown in the display Q:

2Place the multi-function slider H at » STOP«.

3Should there be several dictations extant: Select the one you want by press- ing the function buttons B E/C R »DICT ±« to switch between the saved dictations. When the designation of the dictation recording to be amended is shown in the display Q:

4Place the multi-function slider H at » START«. The selected dictation re- cording is now played back. As soon as the point is played back at which you wish to amend the dictation recording:

5Press the button » DICT« G; as soon as »Record« is indicated in the display Q you can start your new dictation recording. During the dictation recording the lapsed period of the dictation recording is continuously indicated in the display Q. The status lamp »DICT « D glows permanently during the dic- tation recording.

6When you wish to interrupt the dictation recording: Place the multi-function slider H at » STOP«. In the display Q »Record Pause« is indicated, the hith- erto period of the dictation recording remains shown. For as long as the dicta- tion recording is interrupted, the status lamp »DICT « blinks.

To continue the dictation recording: Place the multi-function slider H back at » START«.

7When you wish to terminate the dictation recording:

Press the button » DICT« G once. The status lamp »DICT « D goes out.

7.6.2 Inserting a passage into a recorded dictation

1Switch the voice recorder on by pressing the button »ON/OFF« A. As soon as the start screen is shown in the display Q:

22