6Select, by pressing the function button B E or C R, the type of audio signal to be switched on/off. »Auto off« stands for Ack. beep, »Battery low« for audio warnings. Subsequently select, by pressing the function button D T, »OK«. In the display Q is indicated:
Signal on
Signal off
OK | ESC |
7To switch off the signal tone type selected in step 6: Select, by pressing the function button B E or C R, »Signal off«.
To switch the signal tone type selected in step 6 back on: Select, by pressing the function button B E or C R, »Signal on«.
8Select, by pressing the function button D T, »OK«. In the display Q the se- lection of the type of audio signal is now shown again. To return to the start screen: select, by pressing the function button A W three times in succession, »ESC«.
8.10 Adjusting the illumination
The background illumination of the display can be adjusted so that …
Úit switches on with every press of a button and, after about ten seconds, auto- matically switches itself back off (Setting »auto«)
Úremains permanently switched off (Setting »Off«)
From the factory, the setting is »auto«. To change the setting:
1Switch the voice recorder on by pressing the button »ON/OFF« A. As soon as the start screen is shown in the display Q:
2Place the 
STOP«.
3Then select, by pressing the function button D T, »Menu«. In the display Q is indicated:
44