Úin battery/cell operation, the battery symbol 
; the beams in the battery symbol indicate the current full resp. charged condition of the batteries.
Úin mains power/USB operation the symbol 
.
The voice recorder is now ready for use.
7. Using the voice recorder
7.1 Switching the voice recorder on
1To switch the voice recorder on: Press the button »ON/OFF« A once. The sta- tus lamp »DICT 
« D briefly lights up once. In the display Q the SilverCrest logo is briefly shown; indicated subsequently are:
Úshould the batteries/cells have been exchanged before switching on: the battery selection screen (see chapter 6 »Preparing the voice recorder for use«, step 3); the battery selection screen is not indicated if …
Úthe batteries/cells were not exchanged before switching on
Úthe
Úsubsequently the SilverCrest logo
Ú»INT«, should there not be a memory card inserted into the memory card slot O; in this case the internal memory of the voice recorder is used for dicta- tions.
Ú»EXT«, should there be an SD/MMC memory card inserted into the memory card slot O; in this case the memory card is used exclusively as an external memory for dictation recording.
During software loading phases the hourglass symbol in blended in briefly.
Consequently, a short signal tone sounds and the start screen appears with the following indicators/menu choices:
Should it be that no dictations have yet been saved:
14