Silvercrest KH 2450 manual Manual, Switching audio signals on/off

Manual

after 10 min after 30 min

OK ESC

6Select, by pressing the function buttons B E resp. C R, your preferred setting. Subsequently select, by pressing the function button D T, »OK«; In the dis- play Q the Menu is once again shown. To return to the start screen: select, by pressing the function button A W twice in succession, »ESC«.

8.9 Switching audio signals on/off

This voice recorder is equipped with two types of audio signals:

ÚAck. beep (e.g. after switch-on of the voice recorder, as soon as the start screen is shown.)

ÚAudio warning (e. g. discharged batteries/cells)

From the factory all audio signals are switched on. However, you can separate both warning and ack. beep tones from each other manually, for switch-on and switch- off purposes. To do this:

1Switch the voice recorder on by pressing the button »ON/OFF« A. As soon as the start screen is shown in the display Q:

2Place the multi-function slider H at » STOP«.

3Then select, by pressing the function button D E, »Menu«. In the display Q is indicated:

42