Silvercrest KH 2450 manual Preparing the voice recorder for use, Top, Right, Bottom

5.3 Top

OMemory card slot » SD/MMC« (for SD/MMC memory cards)

AButton »ON/OFF« (for switching the voice recorder on and off)

SMicrophone jack socket »MIC « (for connecting an external microphone

with a 3.5 mm jack plug)

D	Status lamp »DICT	«
F	Microphone »MIC	« (internal microphone of the voice recorder for dictation
	recording)

5.4 Right

G	Button » DICT«
H	Multi-function slider for the functions
Ú	» FFWD« (fast forward at playback)
Ú	» STOP« (stop dictation recording/playback)
Ú	» START« (start dictation recording/playback)
Ú	» REW« (fast rewind at playback )
J	Slider » HOLD« (Activate/Deactivate the key lock)

5.5 Bottom

KUSB interface »« (to connect the voice recorder to a PC)

5.6 Bottom

LBattery compartment »OPEN/BATT « ; Button »RESET«

6. Preparing the voice recorder for use

1Carefully remove the voice recorder from the packaging.

2Only for battery/cell operation: Open the battery compartment L at the rear of the voice recorder. Insert …

Úthe two supplied cells, resp.,

Útwo batteries of the type AA Mignon 1.2 V or

Úbatteries of the type AA/LR06 1.5 V.

Be sure to insert the batteries/cells with their correct polarities. The correct polarity is indicated inside the battery compartment. When done, close and secure the battery compartment.

10