Seiko FB 390 user manual Installation, Installing the Front Table Extension Tray

Page 10

Installation

Before placing the printer in your chosen location, consider the following guidelines:

This printer should be placed on a normal table, printer stand or desk. Be sure that the surface is level, to avoid an uneven load on the carriage as it operates.

Do not install the printer where it may be subjected to unsuitable conditions such as: ·Where there is excessive dust.

·Where it may be splattered with oil or metallic dust. ·Where it may be exposed to direct sunlight. ·Where it may be accidentally splashed with water.

Installing the Front Table Extension Tray

Simply attach it to the front of printer by locating the support lugs in the slots at the edge of the printer front feed.

Support lugs

Front table extension tray

Slots

 

Figure 2-4 Installing the front table extension tray

Installing and Replacing the Ribbon Cassette

1Make sure the printer is turned OFF and disconnect the power cable.

2Open the printer window cover by holding the side of the window cover as shown in Figure 2-5.

Window cover

Sub friction roller

Figure 2-5 Opening the window cover and the Sub friction roller.

5

Image 10
Contents Seiko Precision Important Safety Instructions Table of Contents To enter the Setup Menu System and change the settings Epson Emulation Select Code Pages Features OverviewUser- Friendly Control Panel Automatic Interface SwitchingHigh Resolution Graphics EmulationPreparation UnpackingParts Identification Main parts of printer rear view Paper feed knobInstalling the Front Table Extension Tray InstallationInstalling and Replacing the Ribbon Cassette Connecting the Interface Cable Make sure of the followingConnecting the Power Cord Using the Parallel Interface and the USB InterfaceConnecting to the Power Source Turning the Power on and offLoading paper Paper Thickness AdjustmentAdjusting the gap adjust lever Position Copies ThicknessLoading Cut Sheet Paper Using Tractor Paper Loading Tractor PaperPage Page Tearing off Tractor Paper 15 Tractor paper tear-offSetting Up Your Printer To Work With Software Printing from Your SoftwareControl Panel Indicator LED OffControl Panel Keys and LEDs Top of Form Adjustment Mode Basic Control Panel OperationsTo exit without saving, just turn the printer OFF Tear-off Adjustment ModeUsing the Setup Menu System To exit without saving, just turn off the printerTo enter the Setup Menu System and change the settings To exit the Setup Menu SystemPrinting the Current Setting Report To print the current settingsSeiko Precision FB-390 Options of the Setup Menu System Setup Menu SystemOptions Description FontMaintenance Printing Test H pattern Restoring Factory Printer SettingsUsing the Self Test Functions Slide Pattern Printing TestHex Dump Mode Print ModeCleaning the Cabinet Maintenance and Fault FindingAppendix a Problems And Solutions Intervals and Materials for CleaningError LED on the Control Panel Error Cause RemedyGeneral SpecificationsAppendix B Print HeadMechanism PaperMultipart Dot Spacing Max No Character Printing Print mode Print mode specifications×H inches Graphic Print Specifications Parallel InterfaceUSB Interface Command Code SummaryEpson Emulation Name Code Symbol Character SetBit-Image Graphics ModeDownload Character Input Data ControlFormat Select Code PagesCode No D2 d3 HEX Name