Seiko FB 390 user manual Tear-off Adjustment Mode, Using the Setup Menu System

Page 22

LF/FF: Decrease the top of form by 1/60 inch. You can decrease the margin to a maximum of -10 (-10/60 inch) from the default setting.

Press the ONLINE key to exit and save your new setting. The POWER LED and ONLINE LED blink simultaneously 3 times with a beep, and then the POWER LED will be on.

NOTE

To exit without saving, just turn the printer OFF.

Tear-off Adjustment Mode

There is a tear-off bar at the edge of the window cover. When you have finished printing, you can advance the tractor paper on the tracker to the tear-off bar by the tear-off function to easily tear off the perforated sheets. The tear-off setting determines the distance between the perforation of tractor paper and the tear-off bar. If the default distance is not suitable for you, you can adjust it by the printer’s tear-off adjustment feature.

With the printer online, press both the PARK/LOAD and LF/FF keys for about 3 seconds to get the printer to enter the tear-off adjustment mode. When the printer enters this mode, the ONLINE LED and the POWER LED blink alternately.

Use the PARK/LOAD and LF/FF keys to alter the tear-off setting:

PARK/LOAD: Press the PARK/LOAD key to adjust the distance in 1/60 inch increments. You can maximum increase to +15/60 inch

LF/FF: Press the LF/FF key to adjust the distance in 1/60 inch decrements. You can maximum decrease to -15/60 inch

To exit and save your new setting, press ONLINE key. The POWER LED and the ONLINE LED blink simultaneously for 3 times, then the POWER LED turns on. Your new tear-off setting value is saved.

NOTE

To exit without saving, just turn off the printer.

Using the Setup Menu System

The factory settings of this printer are selected to meet the requirements of the majority of users. However, you may want to use a different character set for a different language or you may prefer printing in different font or style. To achieve this, you can use the Setup Menu System to create your own printer settings by modifying or changing the factory defaults.

The Setup Menu System is divided into several groups, and each group contains a number of

17

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Seiko Precision Important Safety Instructions Table of Contents To enter the Setup Menu System and change the settings Epson Emulation Select Code Pages Features OverviewUser- Friendly Control Panel Automatic Interface SwitchingHigh Resolution Graphics EmulationPreparation UnpackingParts Identification Main parts of printer rear view Paper feed knobInstalling the Front Table Extension Tray InstallationInstalling and Replacing the Ribbon Cassette Connecting the Interface Cable Make sure of the followingConnecting the Power Cord Using the Parallel Interface and the USB InterfaceConnecting to the Power Source Turning the Power on and offLoading paper Paper Thickness AdjustmentAdjusting the gap adjust lever Position Copies ThicknessLoading Cut Sheet Paper Using Tractor Paper Loading Tractor PaperPage Page Tearing off Tractor Paper 15 Tractor paper tear-offSetting Up Your Printer To Work With Software Printing from Your SoftwareControl Panel Indicator LED OffControl Panel Keys and LEDs Top of Form Adjustment Mode Basic Control Panel OperationsTo exit without saving, just turn the printer OFF Tear-off Adjustment ModeUsing the Setup Menu System To exit without saving, just turn off the printerTo enter the Setup Menu System and change the settings To exit the Setup Menu SystemPrinting the Current Setting Report To print the current settingsSeiko Precision FB-390 Options of the Setup Menu System Setup Menu SystemOptions Description FontMaintenance Printing Test H pattern Restoring Factory Printer SettingsUsing the Self Test Functions Slide Pattern Printing TestHex Dump Mode Print ModeCleaning the Cabinet Maintenance and Fault FindingAppendix a Problems And Solutions Intervals and Materials for CleaningError LED on the Control Panel Error Cause RemedyGeneral SpecificationsAppendix B Print HeadMechanism PaperMultipart Dot Spacing Max No Character Printing Print mode Print mode specifications×H inches Graphic Print Specifications Parallel InterfaceUSB Interface Command Code SummaryEpson Emulation Name Code Symbol Character SetBit-Image Graphics ModeDownload Character Input Data ControlFormat Select Code PagesCode No D2 d3 HEX Name
Top Page Image Contents