Slip Paper Handling
Notes:
Use only slip paper that matches the printer’s specifications. See Paper Specifications in Chapter 4.
Be sure that the slip is flat, without curls, folds, and wrinkles.
1.Send appropriate control commands from the computer.
2.When the SLIP light blinks, insert the slip paper into the slip paper inlet using the right edge of the slip paper inlet as a guide. (Follow steps ➀ and ➁ in the illustration.)
2
1
Note:
There is a label on the document table to assist you how to insert slip paper.
3.Make sure you insert the slip paper into the inlet as far as it will go.
4.When the slip sheet is detected by the sensor, the SLIP light is changed from blinking to on and the paper is automatically drawn into the printer and printing begins.