Seiko TM-U590/U590P manual Connecting the Display Module, Grounding the Printer

Page 19

Connecting the Display Module

Plug the cable connector (provided with the direct connection display module) securely into the printer’s display module connector until it clicks.

CAUTION:

Be sure not to connect this cable to the drawer kick-out connector, which is to the left of the power supply connector. Do not connect a telephone line to the display connector. If you do, the printer and the telephone line may be damaged.

Notes:

To remove the cable, squeeze the connector and pull it out.

The display module can be used only for the serial interface.

Grounding the Printer

You need a ground wire to ground your printer. Make sure that the wire is AWG 18 or equivalent.

1. Make sure that the printer is turned off.

Setting Up the Printer 1-7

Image 19

Contents TM-U590/U590P Labels Printer Parts and LabelsValidating and Verifying Checks Setting Up the PrinterSolving Problems Quick ReferencePage For American Users FCC Compliance StatementIii Declaration of Conformity EMI and Safety Standards Applied About This Manual Setting Up and UsingReference Options FeaturesAccessory IntroductionOrdering Ribbon Cassettes Contents Appendix B Epson Sales Subsidiaries Unpacking Setting Up the PrinterRemoving the protective material 2Setting Up the PrinterConnecting the computer Connecting the Cables and Grounding the Printer4Setting Up the Printer Connecting the Drawer Anschließen der Lade 6Setting Up the PrinterGrounding the Printer Connecting the Display Module8Setting Up the Printer Connecting the Power SupplyPage 10Setting Up the Printer Installing the Ribbon CassetteKnob Running the self test Using the Power Switch Cover12Setting Up the Printer Self TestCompleted DIP Switch SettingsRemoving the Paper Guide Slide the paper guide to the left to remove it Control Panel Using the PrinterUsing the Printer Operating the Control Panels2Using the Printer Indicator lightsPanel lights Slip Paper Handling 4Using the Printer Using the Micr Reader OptionReading Micr characters on personal checks Using the Printer Printing problems TroubleshootingTroubleshooting General problemsLine of dots is missing in the printout 2TroubleshootingPrinter sounds like it is printing, but nothing is printed Printout is faintCleaning procedure Cleaning the Optional Micr MechanismPaper handling problems Mica cleaning method Recommended4Troubleshooting Adhesive Cleaning SheetAdhesice cleaning sheet Refer to Figure Explanatin of a cleaning sheetCommand code sequence Moistened Cleaning sheetHexadecimal Dump 6TroubleshootingReference Information Printing SpecificationsPaper Micr Reader Option Ribbon SpecificationsPaper feed speed Paper SpecificationsPaper feed method Paper feed pitchPaper Ambient temperature and copy capability4Reference Information Copy capability and paper thickness 6Reference Information Reference Information Reliability Electrical CharacteristicsMtbf Mcbf Environmental Conditions TemperatureHumidity Serial interface specification Dip Switch SettingSetting the DIP Switches DIP switch functions2Dip Switch Setting Dip Switch Setting A-3 Parallel interface specification4Dip Switch Setting Changing the DIP switch settingsEpson Sales Subsidiaries B-1 Epson Sales Subsidiaries2EPSON Sales Subsidiaries