Seiko TM-U590/U590P manual Reference Information

Page 45

		31
	Form stopper position	8
	Form stopper position	MICR head
		MICR head
	1.3	1.8
	18.9
		TOF sensor
	38.5	position
		39

37.2

18	Center of the print head
Slip feeding roller
position
	Slip side guide	21.9
	Slip side guide
Paper feed direction

BOF sensor

3.6

[ All the numeric values are typical. ]

15

24

10

Area where paper holes are prohibited and reflection rate for the back of paper should be 40% or more.

Paper holes and translucence prohibited area.

Paper feed direction

[Units: mm (All the numeric values are typical.)]

❏Use thinner paper (N30 or equivalent) between the top and bottom sheets of multi-ply paper. If thick paper is used, the copy capability is lowered.

Reference Information 4-7

Image 45

Contents TM-U590/U590P Labels Printer Parts and LabelsSolving Problems Setting Up the PrinterQuick Reference Validating and Verifying ChecksPage FCC Compliance Statement For American UsersIii Declaration of Conformity EMI and Safety Standards Applied Setting Up and Using About This ManualReference Accessory FeaturesIntroduction OptionsOrdering Ribbon Cassettes Contents Appendix B Epson Sales Subsidiaries Unpacking Setting Up the PrinterRemoving the protective material 2Setting Up the PrinterConnecting the computer Connecting the Cables and Grounding the Printer4Setting Up the Printer Connecting the Drawer Anschließen der Lade 6Setting Up the PrinterGrounding the Printer Connecting the Display Module8Setting Up the Printer Connecting the Power SupplyPage 10Setting Up the Printer Installing the Ribbon CassetteKnob 12Setting Up the Printer Using the Power Switch CoverSelf Test Running the self testCompleted DIP Switch SettingsRemoving the Paper Guide Slide the paper guide to the left to remove it Using the Printer Using the PrinterOperating the Control Panels Control PanelIndicator lights 2Using the PrinterPanel lights Slip Paper Handling Using the Micr Reader Option 4Using the PrinterReading Micr characters on personal checks Using the Printer Troubleshooting TroubleshootingGeneral problems Printing problemsPrinter sounds like it is printing, but nothing is printed 2TroubleshootingPrintout is faint Line of dots is missing in the printoutPaper handling problems Cleaning the Optional Micr MechanismMica cleaning method Recommended Cleaning procedure4Troubleshooting Adhesive Cleaning SheetCommand code sequence Explanatin of a cleaning sheetMoistened Cleaning sheet Adhesice cleaning sheet Refer to FigureHexadecimal Dump 6TroubleshootingPrinting Specifications Reference InformationPaper Micr Reader Option Ribbon SpecificationsPaper feed method Paper SpecificationsPaper feed pitch Paper feed speedAmbient temperature and copy capability Paper4Reference Information Copy capability and paper thickness 6Reference Information Reference Information Reliability Electrical CharacteristicsMtbf Mcbf Temperature Environmental ConditionsHumidity Setting the DIP Switches Dip Switch SettingDIP switch functions Serial interface specification2Dip Switch Setting Dip Switch Setting A-3 Parallel interface specification4Dip Switch Setting Changing the DIP switch settingsEpson Sales Subsidiaries B-1 Epson Sales Subsidiaries2EPSON Sales Subsidiaries