Seiko TM-U590/U590P manual Explanatin of a cleaning sheet, Command code sequence

Page 37

9)As a check paper, insert a cleaning sheet into a printer.

*Set yellow non-stick side to be upside when cleaning using adhesive sheet.

10)Remove and do a sheet after cleaning sheet discharge.

11)Turn off the power switch.

Command code sequence

1)MICA cleaning command <FS c> was installed to clean up.

2)Carry our from 8) to 10) described above in the self test mode.

NOTES

In case of using an adhesive cleaning sheet,

1)peel off only desinated pasteboard.

2)insert from correct derection, and

3)insert as peeled portion to be upside.

Explanatin of a cleaning sheet

Moistened Cleaning sheet

PRESAT brand (KIC) “CHECK READER CLEANING CARD” or equivalent cleaning sheet is required.

Adhesice cleaning sheet (Refer to Figure 2)

Part Name : Sheet roller cleaning, A

Part Number : 1038046

Troubleshooting 3-5

Image 37

Contents TM-U590/U590P Labels Printer Parts and LabelsSolving Problems Setting Up the PrinterQuick Reference Validating and Verifying ChecksPage For American Users FCC Compliance StatementIii Declaration of Conformity EMI and Safety Standards Applied About This Manual Setting Up and UsingReference Accessory FeaturesIntroduction OptionsOrdering Ribbon Cassettes Contents Appendix B Epson Sales Subsidiaries Unpacking Setting Up the PrinterRemoving the protective material 2Setting Up the PrinterConnecting the computer Connecting the Cables and Grounding the Printer4Setting Up the Printer Connecting the Drawer Anschließen der Lade 6Setting Up the PrinterGrounding the Printer Connecting the Display Module8Setting Up the Printer Connecting the Power SupplyPage 10Setting Up the Printer Installing the Ribbon CassetteKnob 12Setting Up the Printer Using the Power Switch CoverSelf Test Running the self testCompleted DIP Switch SettingsRemoving the Paper Guide Slide the paper guide to the left to remove it Using the Printer Using the PrinterOperating the Control Panels Control Panel2Using the Printer Indicator lightsPanel lights Slip Paper Handling 4Using the Printer Using the Micr Reader OptionReading Micr characters on personal checks Using the Printer Troubleshooting TroubleshootingGeneral problems Printing problems Printer sounds like it is printing, but nothing is printed 2Troubleshooting Printout is faint Line of dots is missing in the printoutPaper handling problems Cleaning the Optional Micr MechanismMica cleaning method Recommended Cleaning procedure4Troubleshooting Adhesive Cleaning SheetCommand code sequence Explanatin of a cleaning sheetMoistened Cleaning sheet Adhesice cleaning sheet Refer to FigureHexadecimal Dump 6TroubleshootingReference Information Printing SpecificationsPaper Micr Reader Option Ribbon SpecificationsPaper feed method Paper SpecificationsPaper feed pitch Paper feed speedPaper Ambient temperature and copy capability4Reference Information Copy capability and paper thickness 6Reference Information Reference Information Reliability Electrical CharacteristicsMtbf Mcbf Environmental Conditions TemperatureHumidity Setting the DIP Switches Dip Switch SettingDIP switch functions Serial interface specification2Dip Switch Setting Dip Switch Setting A-3 Parallel interface specification4Dip Switch Setting Changing the DIP switch settingsEpson Sales Subsidiaries B-1 Epson Sales Subsidiaries2EPSON Sales Subsidiaries