User Settings, Serial Transport | Tascam MMR-8 manual

Serial Transport

Similar to Biphase Transport, this mode allows the MMR-8 to control an external audio or video transport connected to the 9-pin serial Transport connector. Video and audio decks using the P2 protocol can be controlled (including models from Accom, Alesis, Ampex, Fostex, JVC, Otari, Panasonic, Sony, and Tascam).

Editor

Using the Editor connector (and Sony P2 protocol) a video editor or other non-Lynx synchronizer can control the MMR-8 transport functions when the MMR-8 Control Mode is set to Editor.

Varispeed

Varispeed mode functions in the same way as the Local/Bus mode, with the addition of varispeed operation by manual adjustment of the internal sample rate. Again, the MMR-8 can be the master machine on the MMR or Lynx buses.

In most applications, setting the desired Control mode is sufficient to begin using the MMR-8, since the other relevant Setup parameters are adequate for each mode. But, for those that need to, any of the seven Control modes can be further customized by changing the relevant Setup parameters. This customized setting can then be used for that session or it can be saved to the internal hard disk, in one of ten User settings files, for future recall.

User Settings

To save a customized setting, select Setup Menu 900 (press SETUP, then the 9 key). Press the TRIM key, and rotate the Wheel or use the arrow keys to select the User settings file number (1 - 10) desired. Press STO. This saves all of the current Setup parameters to disk in the target User settings file. These settings are retained by the MMR-8, independently of even the usual automatic-save, automatic-restore sequence, and may be recalled when desired.

To recall a previously stored User setting, select Setup Menu 901 (press SETUP, the 9 key, and rotate the Wheel CW or use the arrow keys to locate menu 901, “Recall Settings”). Select the desired User settings file from the list (press TRIM to change the Wheel and arrow key function to scroll through the Menu selections). It is not possible in software version 1.2 to name the User settings files, nor is it possible to back them up to floppy disk or to restore them to hard disk. It is planned to add this capability in a future software version so that User settings can be transferred to other MMR-8s using a floppy disk. Note that Setup Menu 901 also allows the operator to select the last User setting that was used (“Previous” option) as well as reset the MMR-8 to the factory defaults (“Default” option).

Most Control modes require that certain synchronization signals appear on one or more MMR-8 sync inputs. If these signals are not present, the MMR-8 will fail to respond correctly. The following typical configuration information is divided into the three main application areas of the MMR-8 (video, film, and audio-only). Typical signal connections and Setup Menu selections are covered.

74	Tascam MMR-8 Owner’s Manual • Chapter 4 • MMR-8 Setup Menus MMR-8

MMR-8 specifications

The Tascam MMP-16 and MMR-8 are two innovative products designed to meet the specialized needs of audio professionals, offering advanced features and capabilities suitable for various recording and playback applications.

The Tascam MMP-16 is a versatile audio router and mixer that excels in different environments, from live sound to studio recording. One of its primary features is the 16-channel configuration, allowing for significant flexibility in signal routing. The MMP-16 supports multiple audio formats, including analog signals, making it adaptable to a wide range of setups. It boasts high-quality AD/DA conversion, delivering excellent audio fidelity and low latency performance.

Additionally, the MMP-16 is equipped with comprehensive digital processing capabilities, including EQ and dynamics processing on each channel. This makes it ideal for both mixing live performances and preparing recordings for post-production. The unit's user-friendly interface includes an intuitive display and physical controls that streamline operation, making it easy for both novice and experienced engineers to navigate.

On the other hand, the Tascam MMR-8 is a robust multi-track digital audio recorder that offers exceptional reliability for professionals who require high-quality audio capture. This 8-channel recorder shines in its ability to handle various digital audio formats, ensuring compatibility with different workflows. One standout feature of the MMR-8 is its solid-state recording technology, which enhances durability and reduces the risk of data loss, a crucial aspect in high-stakes recording environments.

The MMR-8 also provides comprehensive onboard monitoring options, allowing users to assess audio quality in real time. Its extensive connectivity options include digital and analog inputs and outputs, facilitating seamless integration with other studio equipment and live sound systems. The data management capabilities of the MMR-8 make it easy to organize and retrieve recordings, while its compact design ensures portability without compromising on performance.

Both the MMP-16 and MMR-8 showcase Tascam's commitment to innovation and quality in the audio industry. Their advanced features, coupled with solid build quality and ease of use, make them essential tools for audio professionals seeking reliable solutions for their recording and mixing needs. Whether utilized separately or in conjunction, these devices amplify creativity and enhance the overall audio production experience.