Savin 3460DNP operating instructions Entering a User Code to Use the Machine

Page 37

Operation

Entering a User Code to Use the Machine

If user codes are turned on, operators

1 must enter their user code before they can use the machine. The machine keeps count of the number of copies made under each user code.

Note

❒If you want to use this feature, you must turn it on and register the user codes with the user tools. You can register up to 20 user codes. See “Set User Code” and “Reg. User Code” on p.153 “6. Adminis- trator Mode”.

❒When user codes are turned on, the machine will prompt you for your user code when you turn on the main switch or after the ma- chine has been reset.

A Enter your 4–digit user code with the number keys.

Note

❒User codes are not displayed on the panel display.

❒To change the number entered, press the {Clear/Stop} key and enter the new number.

B Press the {q} key.

C Make your prints.

D To prevent others from making prints with your user code, hold down the {Clear Modes/Energy Sav- er } key, and then press the {Clear/Stop} key.

18

Image 37

Contents Operating Instructions Means Power ON. b means Power OFF Introduction Safety During Operation Safety InformationPage Symbols How to Read This ManualPlace your originals in one of the following two ways Making PrintsPlace a single page face down Insert a stack of originals facePage What You Can do with this Machine All Class Mode Economy ModeAuto Class Mode Manual Class ModeAuto Combine Mode Class ModeSecurity Mode Quality Start ModeImage Rotation Printing in Two Colors Date StampMake-up Printing Merging ImagesOriginal Storage Memory CombineStorage Overlay See p.118 Memory CombineTable of Contents Image Rotation Make-up Printing Features Security Mode Quality Start ModePrinting onto Various Kinds of Paper Job Separation Conserving the Master Double FeedColor Printing Using the Optional Color Drum 132 Command Sheets for Make-Up PrintingCombination Chart 137 Make-up Printing Make-up Samples 100 Original Storage 103User Tool Menus in Detail 156 Accessing the User Tools 141 User Tools Menu 143Loading Paper 174 Clearing Misfeeds 175 Poor Printing 193 Dos and Donts 197 Where to Put Your Machine 199Maintaining Your Machine 201 211Xvi Machine Exterior Machine Interior Drum unit lock lever B1 Ink holderDrum unit Exposure glassDocument feeder OptionsDocument Feeder Keys Operation PanelNumber keys V keys Speed keysIndicators Prev.Next Panel DisplayAvailable functions Confirms the settings Sample display when selecting the Original keyPanel Display Layout Page Print Paper OperationOperation Originals = 8mm Loading Paper Printing PreparationsCarefully open the paper feed tray Lift the paper feed side platesSetting Up The Paper Delivery Tray Lower the paper alignment wings Turn on the main switchLift the paper alignment wings Swing out the guides as shown in the illustrationEnter your 4-digit user code with the number keys Entering a User Code to Use the MachineStandard Printing Make sure that there are no previ- ous settings remainingLift the exposure glass cover Removing Prints Standard Printing Energy Saver Mode Auto Reset Adjust image position using the ~, , , and keys Adjusting the Position of Printed ImagesPress the Image = key Press the Image Density key to adjust the image density Adjusting the Image Density of PrintsBefore Making a Master Before making a masterTint Mode Changing the Printing Speed Stopping a Multi-print Run to Print Another Original Stopping a Multi-print RunMetric version Reducing and Enlarging Using Preset RatiosInch version Operation Auto Magnification Inch version Make your prints Adjust the ratio with the ← → or ~ keys Using the ← → or ~ keysZoom Press the Ratio key Select Mag. with the → or keyUsing the number keys Select Direct.Mag.% with the → or key Directional Magnification %Make sure that the original Directional Magnification Size Directional Magnification Size Erasing Center and Edge Margins When not using Edge Erase mode Using Edge Erase modeEdge Erase Press the Edge Erase keyRect, adjust it using the Image Printing onto Thick Paper Printing onto Various Kinds of PaperPress the Ppr.Type key Printing onto Special Kinds of Paper Printing onto EnvelopesTo prevent paper misfeeds Selecting Original Modes Letter/Photo Mode PrintingAdjust the contrast with the ← → or ~ keys Photo Mode PrintingAdjust the contrast with Pencil Mode PrintingPress the Original key Make your prints Press the Economy Mode key Economy ModeAuto Cycle All Class Mode All Class Mode Auto Class Mode Press the Select key Select the desired class for the 1st grade with the keyEnter the desired grade Class with the number keys Make your prints With the → or Manual Class Mode with One OriginalOperation Press the Class key Manual Class Mode with two or More OriginalsPress the Auto Cycle key Press the Print key Repeat step N until you have finished printing