Savin 3460DNP operating instructions Directional Magnification Size

Operation

Directional Magnification (Size)

	Use this function to have the machine	A Press the [Ratio] key.
	select suitable reproduction ratios
1
	based upon the dimensions of the

print you require and the size of the original you specify.

	1
	3
2	4
	CP2M01EE

1.Horizontal original size

2.Vertical original size

3.Horizontal print size

4.Vertical print size

Note

❒You can enter sizes within the fol- lowing ranges.

Metric ver- 1 - 999mm (in 1mm steps) sion

Inch version 0.1" - 99.9" (in 0.1" steps)

❒The range of ratios which the ma- chine can select depends on where you place the original:

• On the exposure glass: 50-200%

❒If the calculated ratio is over the maximum or under the minimum ratio, it is corrected within the range of ratios automatically.

B Select [Mag.] with the [→] or {}} key.

C Press the [OK] key.

D Select [Direct.Mag.(Size)] with the [→] or {}} key.

E Press the [OK] key.

38