Operation
I Press the {Proof} key and check the image density and the image position on the proof print.
1
Note
❒If the image position is not cor-
rect, adjust it using the [Image =] key. See p.24 “Adjusting the Position of Printed Images”.
❒If the image density is slightly
dark or light, adjust the image density using the {W}{V} keys. See p.25 “Adjusting the Image Density of Prints”.
J Enter the number of prints re- quired with the number keys.
K Press the {Print} key.
Note
❒To stop the machine during a
multi - print run, press the
{Clear/Stop} key.
❒To return the machine to the ini-
tial condition after printing,
press the {Clear Modes/Energy Saver} key.
Removing Prints
A Pull the front paper delivery side plate down towards you to open.
Note
❒To change the number entered, press the {Clear/Stop} key and enter the new number.
Note
❒You cannot open the rear paper delivery side plate.
20