Savin 3460DNP operating instructions Directional Magnification Size

Page 58

Directional Magnification (Size)

F Enter the vertical original size with the number keys and press the {q} key.

Note

❒To change the value entered, press the {Clear/Stop} key and enter the new value.

❒Up to 999mm, 99.9" can be en- tered.

G Enter the vertical print size with the number keys, and then press the {q} key.

H Enter the horizontal original size with the number keys, and then press the {q} key.

I Enter the horizontal print size with the number keys.

J Press the [OK] key.

M Press the {Start} key.

1

N Check the image position on the trial or proof print.

Note

❒If the image position is not cor-

rect, adjust it using the [Image =] key. See p.24 “Adjusting the Position of Printed Images”.

O Make your prints.

The machine will select appropri- ate reproduction ratios for the ver- tical and horizontal directions.

K Make sure that the original and the print paper are the correct size.

L Place your original on the expo- sure glass or in the optional docu- ment feeder.

39

Image 58

Contents Operating Instructions Means Power ON. b means Power OFF Introduction Safety Information Safety During OperationPage How to Read This Manual SymbolsPlace a single page face down Making PrintsPlace your originals in one of the following two ways Insert a stack of originals facePage What You Can do with this Machine Auto Class Mode Economy ModeAll Class Mode Manual Class ModeSecurity Mode Class ModeAuto Combine Mode Quality Start ModeMake-up Printing Printing in Two Colors Date StampImage Rotation Merging ImagesStorage Overlay Memory CombineOriginal Storage See p.118 Memory CombineTable of Contents Printing onto Various Kinds of Paper Security Mode Quality Start ModeImage Rotation Make-up Printing Features Job Separation Conserving the Master Double FeedCombination Chart 137 Command Sheets for Make-Up PrintingColor Printing Using the Optional Color Drum 132 Make-up Printing Make-up Samples 100 Original Storage 103User Tool Menus in Detail 156 Accessing the User Tools 141 User Tools Menu 143Loading Paper 174 Clearing Misfeeds 175 Maintaining Your Machine 201 Dos and Donts 197 Where to Put Your Machine 199Poor Printing 193 211Xvi Machine Exterior Machine Interior Drum unit Ink holderDrum unit lock lever B1 Exposure glassDocument feeder OptionsDocument Feeder Operation Panel KeysV keys Speed keys Number keysIndicators Panel Display Prev.NextAvailable functions Confirms the settings Sample display when selecting the Original keyPanel Display Layout Page Operation Print PaperOperation Originals = 8mm Carefully open the paper feed tray Printing PreparationsLoading Paper Lift the paper feed side platesSetting Up The Paper Delivery Tray Lift the paper alignment wings Turn on the main switchLower the paper alignment wings Swing out the guides as shown in the illustrationEntering a User Code to Use the Machine Enter your 4-digit user code with the number keysStandard Printing Make sure that there are no previ- ous settings remainingLift the exposure glass cover Removing Prints Standard Printing Energy Saver Mode Auto Reset Adjust image position using the ~, , , and keys Adjusting the Position of Printed ImagesPress the Image = key Before Making a Master Adjusting the Image Density of PrintsPress the Image Density key to adjust the image density Before making a masterTint Mode Changing the Printing Speed Stopping a Multi-print Run Stopping a Multi-print Run to Print Another OriginalMetric version Reducing and Enlarging Using Preset RatiosInch version Operation Auto Magnification Inch version Make your prints Zoom Using the ← → or ~ keysAdjust the ratio with the ← → or ~ keys Press the Ratio key Select Mag. with the → or keyUsing the number keys Directional Magnification % Select Direct.Mag.% with the → or keyMake sure that the original Directional Magnification Size Directional Magnification Size Erasing Center and Edge Margins Edge Erase Using Edge Erase modeWhen not using Edge Erase mode Press the Edge Erase keyRect, adjust it using the Image Printing onto Thick Paper Printing onto Various Kinds of PaperPress the Ppr.Type key Printing onto Envelopes Printing onto Special Kinds of PaperTo prevent paper misfeeds Letter/Photo Mode Printing Selecting Original ModesPhoto Mode Printing Adjust the contrast with the ← → or ~ keysAdjust the contrast with Pencil Mode PrintingPress the Original key Make your prints Economy Mode Press the Economy Mode keyAuto Cycle All Class Mode All Class Mode Auto Class Mode Press the Select key Select the desired class for the 1st grade with the keyEnter the desired grade Class with the number keys Make your prints Manual Class Mode with One Original With the → orOperation Manual Class Mode with two or More Originals Press the Class keyPress the Auto Cycle key Press the Print key Repeat step N until you have finished printing