Operation
| All Class Mode |
1 | Preparation |
You have to store the number of |
students in each class with the user tools. See p.157
Use the {Class} key to make sets of prints from the same original. All the stored numbers of prints are made for each set.
This feature is useful for teachers who frequently make multiple print sets for classes e.g. notes, handouts, tests etc.
Using a standard print mode, the teacher would have to stand by the machine entering the number of prints and pressing the {Print} key for each class. However, All Class mode allows you to store the number of stu- dents in each class into the machine memory beforehand with the user tools. Whenever you need to make print sets for all the classes, place your original, select [ALL] and press the {Start} key. Print sets will be made containing the correct number of prints for each class.
GRCLAS2E |
Note
❒When you choose All Class mode, Job Separation mode is automati- cally turned on. The job separator pulls the top sheet of the each set delivered to the paper delivery tray to mark the end of each printed set. The next cycle begins automatical- ly. See p.79 “Job Separation”.
❒You can cancel Job Separation mode in All Class mode with the user tools. See “Auto Separate” on p.146 “4. Mode Setting”.
A Press the {Class} key.
B Make sure that [ALL] is selected.
C Press the [OK] key.
D Place one original on the expo- sure glass or in the optional docu- ment feeder.
52