Standard Printing
Standard Printing
A Make sure that the machine is ready for printing.
B If user codes are turned on, enter your user code with the number keys, and then press the {q} key.
Reference
See p.18 “Entering a User Code to Use the Machine”.
C Make sure that there are no previ- ous settings remaining.
Note
❒To clear any previous settings, press the {Clear Modes/Energy Saver} key.
D Lift the exposure glass cover.
TPEH010E |
Note
❒Be sure to lift the exposure glass cover more than 30cm, 12".
E Place the original face down on | 1 |
the exposure glass. The original |
should be aligned with the refer- ence mark and the left corner scale.
1.Left corner scale
2.Reference mark
F Lower the exposure glass cover. G Make your desired settings.
H Press the {Start} key.
A trial print is delivered to the pa- per delivery tray.
19