Savin 3460DNP operating instructions Adjusting the Image Density of Prints, Before Making a Master

Page 44

Adjusting the Image Density of Prints

Adjusting the Image Density of Prints

There are two ways to adjust the im- age density of prints:

Before making a master

Use the {Image Density} key.

After making a master

Use the {W}{V} (Speed) keys.

Before Making a Master

A Press the {Image Density} key to adjust the image density.

 

Stamp

Image Density

 

 

Lighter

On Line

 

 

 

 

Normal

 

 

 

Darker 1

 

 

Make-Up

Darker 2

Auto On Line

 

 

 

 

Over lay

Economy Mode

 

Skip Feed

Edge Erase

Original Storage

Job Separator

ZDZS010N

B Press the {Start} key.

After Making a Master

 

1

 

 

 

A To increase the image density, press the {W} key. To reduce the image density, press the {V} key.

Note

The faster the printing speed be- comes, the lighter the printing density is. If you want darker prints, decrease the printing speed.

25

Image 44
Contents Operating Instructions Means Power ON. b means Power OFF Introduction Safety Information Safety During OperationPage How to Read This Manual SymbolsMaking Prints Place your originals in one of the following two waysPlace a single page face down Insert a stack of originals facePage What You Can do with this Machine Economy Mode All Class ModeAuto Class Mode Manual Class ModeClass Mode Auto Combine ModeSecurity Mode Quality Start ModePrinting in Two Colors Date Stamp Image RotationMake-up Printing Merging ImagesMemory Combine Original StorageStorage Overlay See p.118 Memory CombineTable of Contents Security Mode Quality Start Mode Image Rotation Make-up Printing FeaturesPrinting onto Various Kinds of Paper Job Separation Conserving the Master Double FeedCommand Sheets for Make-Up Printing Color Printing Using the Optional Color Drum 132Combination Chart 137 Make-up Printing Make-up Samples 100 Original Storage 103Loading Paper 174 Clearing Misfeeds 175 Accessing the User Tools 141 User Tools Menu 143User Tool Menus in Detail 156 Dos and Donts 197 Where to Put Your Machine 199 Poor Printing 193Maintaining Your Machine 201 211Xvi Machine Exterior Machine Interior Ink holder Drum unit lock lever B1Drum unit Exposure glassDocument Feeder OptionsDocument feeder Operation Panel KeysV keys Speed keys Number keysIndicators Panel Display Prev.NextPanel Display Layout Sample display when selecting the Original keyAvailable functions Confirms the settings Page Operation Print PaperOperation Originals = 8mm Printing Preparations Loading PaperCarefully open the paper feed tray Lift the paper feed side platesSetting Up The Paper Delivery Tray Turn on the main switch Lower the paper alignment wingsLift the paper alignment wings Swing out the guides as shown in the illustrationEntering a User Code to Use the Machine Enter your 4-digit user code with the number keysLift the exposure glass cover Make sure that there are no previ- ous settings remainingStandard Printing Removing Prints Standard Printing Energy Saver Mode Auto Reset Press the Image = key Adjusting the Position of Printed ImagesAdjust image position using the ~, , , and keys Adjusting the Image Density of Prints Press the Image Density key to adjust the image densityBefore Making a Master Before making a masterTint Mode Changing the Printing Speed Stopping a Multi-print Run Stopping a Multi-print Run to Print Another OriginalInch version Reducing and Enlarging Using Preset RatiosMetric version Operation Auto Magnification Inch version Make your prints Using the ← → or ~ keys Adjust the ratio with the ← → or ~ keysZoom Press the Ratio key Select Mag. with the → or keyUsing the number keys Directional Magnification % Select Direct.Mag.% with the → or keyMake sure that the original Directional Magnification Size Directional Magnification Size Erasing Center and Edge Margins Using Edge Erase mode When not using Edge Erase modeEdge Erase Press the Edge Erase keyRect, adjust it using the Image Press the Ppr.Type key Printing onto Various Kinds of PaperPrinting onto Thick Paper Printing onto Envelopes Printing onto Special Kinds of PaperTo prevent paper misfeeds Letter/Photo Mode Printing Selecting Original ModesPhoto Mode Printing Adjust the contrast with the ← → or ~ keysPress the Original key Pencil Mode PrintingAdjust the contrast with Make your prints Economy Mode Press the Economy Mode keyAuto Cycle All Class Mode All Class Mode Auto Class Mode Enter the desired grade Class with the number keys Select the desired class for the 1st grade with the keyPress the Select key Make your prints Manual Class Mode with One Original With the → orOperation Manual Class Mode with two or More Originals Press the Class keyPress the Auto Cycle key Press the Print key Repeat step N until you have finished printing