Configuration | Tank Gauge Transmitter |
|
|
For example, to enter the alpha character "N"; first press the shift key, then press the number 4. To enter the alpha character "R"; first press the shift key, then press the number 1.
Terminal Mode Configuration
When the Model 1200 is connected to the ATTI Bus and turned on, a blank screen will appear on the Model 1200 after a self test sequence. Pressing any key will cause the following screen to appear on the Model 1200 display:
The version indicated is the software version of the ATT.
Enter a "D" (to select Display Mode entries) or an "A" (to select Alter Mode entries) and press F4 (Enter).
If the Display Mode is selected with a "D", current status and configuration data may be examined but cannot be modified. This mode is useful for verifying ATT configuration. This mode cannot be used to actively monitor ATT operation, as normal ATT operation is suspended when the Model 1200 is connected.
Figure 3-1: ATT Alter Mode Menu Tree
If the Alter Mode is selected with an "A", all applicable configuration parameters can be modified. Figure
Figure 3-2: ATT Display Mode Menu Tree
12 | Installation and Operations Manual |