Varec 4000 manual Configuration Menu Description

4000Configuration

3.4.3	Configuration Menu
Configuration Menu	Description
Level Units	Level units used for display and Modbus data. FT-IN-16TH, M,
	or FT are valid. Use F1/F2 to select.
Temp Units	Temperature units used for display and Modbus data. F, C, or K
	are valid. Use F1/F2 to select.
Level Sensor	Direction of gauge. Forward/Reverse
Calib Level2	Command used to calibrate to a new level. Pressing F4 causes
	ATT to ask for the current level to be entered.
Batt Off2	Command used to turn the battery off. Pressing F4 causes the
	battery to be turned off.
Damping	Damping value used for level and temperature readings. 0-16
	is valid.
Temp Sensor	Type of temperature sensor attached. None, Copper RTD, or
	Platinum RTD are valid. Use F1/F2 to select.
Manual Temperature	If there is no temperature sensor, this is the value displayed
	and returned for temperature.
Noise Reject	Sets up the noise rejection for the A/D. 50 and 60 Hz are valid.
	Use F1/F2 to select.
Critical High Level	Critical high level alarm setpoint.
Advisory High Level	Advisory high level alarm setpoint.
Advisory Low Level	Advisory Low LevelAdvisory low level alarm setpoint.
Critical Low Level	Critical low level alarm setpoint.
Level Deadband	Deadband used for level alarms.
Critical High Temp	Critical high temperature alarm setpoint.
Advisory High Temp	Advisory high temperature alarm setpoint.
Advisory Low Temp	Advisory low temperature alarm setpoint.
Critical Low Temp	Critical low temperature alarm setpoint.
Temp Deadband	Deadband used for temperature alarms.

17