Unitech PT-500 manual SET Menu, Main Menu, Time Menu

Page 19

terminal. MAIN.EXE is a user application program downloaded to the PT-500. MAIN.EXE and its internal name (Song Demo v1.00, which is defined in the RESOURCE area of user’s C program) will appear only if you have downloaded the program into the PT-500. EzJob features will be described in more detail in the EzJob Mode section.

In this example:

Select [1] to run EzJob.

Select [2] to run MAIN.EXE.

Select [EXIT] to return to the previous menu.

2. SET MENU

Select [2] to configure the PT-500 System Setting under the

MAIN MENU.

< SET MENU >

1-TIME 2-CODE

3-COMM 4-BEEP

5-FNKY 6-MISC

1. TIME MENU

Select [1-TIME] to enter the TIME MENU to adjust the date and time of the PT-500.

< SET MENU >

1-Time 2-Date

Select [1] to change the time.

Select [2] to change the date.

Select [EXIT] to return to the previous menu.

18

Image 19
Contents USER’S Guide Page Chapter Installation Table of ContentOverview UPC, EAN, CODE39, I 2 of 5, Codbar Technical SpecificationSoftware System Application DevelopmentMain Battery Power On and Off the PT-500Batteries Backup Battery Using the Keypad Turn on and off of the terminal Interface Port Triggering the Scanner ModuleOptional Charging and Communication Cradle Side Comm SpareMain PowerOperation Ready Mode Page RUN Menu System ModeMain Menu SET MenuTime Menu Code Menu Beep Menu Comm MenuFnky Menu Define F1 Misc Menu DEL Menu DIR MenuDiag LCD Diag MenuDiag KBD Diag MEM Diag COMInit Menu Input EasyJob ModePurge DumpOFF /ON FormatMMDDYYYYhhmmss CRLF/NONE/CR/LFIf ON, each record will include a Xlib EXE Application ModeEXE Xlink EXELNK BAT Maininfo COMSetenv BAT ASM BAT