(This example is for units with 1024KB RAM memory. Units with 128, 256, or 512 KB memory will display messages appropriate for their respective memory size.)
Hold the power on/off key down for at least 3 seconds. The
Under the Ready Mode, your keypad input will be displayed and sent out through the RS232 port. You can use [BkSp], [Del], and 2 arrow keys to do simple data editing. You can also scan barcode labels, and the decoded label will be displayed and sent out through the RS232 port.
If there is no input activity for more than 3 minutes, the default setting of the auto power off function will shut the PT- 500 off automatically to conserve power. To turn this feature off, or to increase/decrease the time delay for auto power off, please refer to the System Mode section to change the system settings.
Default Settings for the Function Keys under Ready Mode are as follows:
[F1] to enter INPUT Prompt
[F2] to enter CODE MENU
[F3] to enter COMM MENU
[F4] to enter MISC MENU
The purpose of the Function Keys is to provide shortcuts to access system functions and settings. Please refer to the System Mode section for the definition of Function Keys settings.
16